EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet(Preliminary) TOP View LEDs 67-21/R6C-FN2Q1BZ/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Material Emitted Color AlGaInP Brilliant Red Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 1 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 2 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 120 mW IFP 100 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous intensity IV 36 ----- 90 mcd IF=10mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=10mA Peak Wavelength λp ----- 632 ----- nm IF=10mA Dominant Wavelength λd 621 ----- 631 nm IF=10mA △λ ----- 20 ----- nm IF=10mA Forward Voltage VF 1.75 ----- 2.35 V IF=10mA Reverse Current IR ----- ----- 10 μA Spectrum Radiation Bandwidth VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 3 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Bin Range Of Dominant Wavelength Group Bin Code Min. Max. Unit Condition FF1 FF2 621 626 626 631 nm IF=10mA F Bin Rang Of Luminous Intensity Bin Min Max Unit Condition N2 P1 P2 Q1 36 45 57 72 45 57 72 90 mcd IF=10mA Bin Rang Of Forward Voltage Group Bin Min Max Unit Condition B 0 1 2 1.75 1.95 2.15 1.95 2.15 2.35 V IF=10mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 4 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 5 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 6 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 7 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 8 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 9 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R6C-FN2Q1BZ/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 10 of 10 Device No. :DSE-671-286 prepared date:3-Oct-2005 Prepared by: Ray Yuan