Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Features ․P-LCC-2 package. ˙Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence.The mixture of blue light and yellow light results in a white emission. Applications ․OA equipment ․Backlighting of full color LCD ․Automotive equipment ․Replacement of conventional light bulbs and fluorescent lamps Device Selection Guide Chip Emitted Color Resin Color White Water Clear Material InGaN Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 1 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Package Dimensions CL - + Polarity For reflow soldering (propose) Note : Tolerances dimension ±0.1 unless otherwise noted Unit : mm Note: Tolerance unless mentioned is: ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 2 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 900 -- 1800 mcd IF=20mA Viewing Angle 2θ1/2 -- 120 -- deg IF=20mA Forward Voltage VF 3.00 -- 3.60 V IF=20mA Reverse Current IR -- -- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 3 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Bin Range of Luminous Intensity Bin Code Min. Max. V2 900 1120 W1 1120 1420 W2 1420 1800 Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range of Forward Voltage Group Bin Code Min. Max. 37 3.00 3.10 38 3.10 3.20 39 3.20 3.30 40 3.30 3.40 41 3.40 3.50 42 3.50 3.60 B22 Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 4 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Bin Range of Chromaticity Coordinate Group Bin Code B6-1 Y B6-2 CIE_x CIE_y 0.3090 0.3045 0.3070 0.3150 0.3185 0.3270 0.3195 Bin Code CIE_x CIE_y 0.3110 0.2940 0.3090 0.3045 0.3195 0.3165 0.3165 0.3205 0.3060 0.3195 0.3165 0.3205 0.3060 0.3185 0.3270 0.3195 0.3165 0.3300 0.3390 0.3300 0.3285 0.3300 0.3180 B6-3 B6-4 0.3300 0.3285 Note: Tolerance of Chromaticity Coordinates: ±0.01 Condition IF =20mA The C.I.E. 1931 Chromaticity Diagram 0.34 B6-2 0.32 B6-4 y B6-1 B6-3 0.30 0.31 0.32 0.33 x Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 5 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current vs. Forward Voltage Ta=25°C Forward Current 75 50 25 0 400 500 600 700 40 30 20 10 0 2.4 800 Wavelength λ (nm) Forward Current Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) 1000 100 10 1 -60 -40 -20 3.8 4.2 2.6 3.0 3.4 Forward Voltage (VF)-volts Relative Luminous Intensity vs Relative Luminous Intensity vs. 0 20 40 60 80 100 1000 f=1KHz Duty=1/10 10 1 0 10 1 2 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current I (mA) F Ta=25°C 100 Ambient Temperature Ta (°C) 10° Ta=25°C 20° 30° 40 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: Ta=25°C 50 I F (mA) Relative luminous intensity (%) 100 http://www.everlight.com 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Rev. 1 Page: 6 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is: 1mm; Unit = mm Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 7 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: Tolerance unless mentioned is: ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Desiccant Label Rev. 1 Page: 8 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 10sec. 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 9 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Rev. 1 Page: 10 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0 Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Revision Device : 1 No. : DSE-0001216 LifecyclePhase: http://www.everlight.com Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Rev. 1 Page: 11 of 11 Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa Expired Period: Forever 23:19:10.0