Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Features ˙P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. ․This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Blue Water Clear Material InGaN Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 1 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Package Dimensions Polarity Recommended solding pad design Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 2 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Absolute Maximum Ratings (TA=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity IV 285 ----- 715 mcd IF=30mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=30mA Peak Wavelength λP ----- 468 ----- nm IF=30mA Dominant Wavelength λd 464.5 ----- 476.5 nm IF=30mA Spectrum Radiation Bandwidth △λ ----- 35 ----- nm IF=30mA Forward Voltage VF 2.75 ----- 3.95 V IF=30mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 3 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Bin Range of Dominant Wavelengths Group Bin Code Min. Max. A9 464.5 467.5 A10 467.5 470.5 A11 470.5 473.5 A12 473.5 476.5 A Unit Condition nm IF=30mA Unit Condition mcd IF=30mA Unit Condition V IF=30mA Bin Range of Luminous Intensity Bin Min Max T1 285 360 T2 360 450 U1 450 565 U2 565 715 Bin Range of Forward Voltage Group Bin Min Max 5 2.75 3.05 6 3.05 3.35 M 7 3.35 3.65 8 3.65 3.95 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 4 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Typical Electro-Optical Characteristic Curves Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 5 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Label Explanation Pb CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 6 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Carrier Tape Dimensions; Loaded Quantity 2000 pcs Per Reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Desiccant Rev.1 Label Page: 7 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. 6 Min. 22 PCS 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 30 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 8 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 9 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-0002485 Revision :1 LifecyclePhase: Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 10 of 10 Prepared by: Ya_Hui Fang Release Date:2009-09-29 20:31:55.0 Expired Period: Forever