EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Features ․P-LCC-4 package ․Optical indicator ․Colorless clear window ․Ideal for backlight and light pipe application ․Inter reflector ․Wide viewing angle ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment ․Available on tape and reel (8mm Tape) ․Pb-free ․The product itself will remain within RoHS compliant version Descriptions ․The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax ․Flat backlight for LCD’s, switches and symbols ․Light pipe application ․General use Device Selection Guide Chip Revision Emitted Color Type Material R6 AlGaInP Brilliant Red Y2 AlGaInP Brilliant Yellow Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Resin Color Water Clear Rev. 1 Page：1 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T CL 3 4 2 1 3 Yellow 2 4 Red 2.8±0.2 1 0.7±0.1 2.2±0.1 Package Dimensions 3.2±0.2 3.5±0.2 0.15±0.05 0.8±0.1 1.9±0.2 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Note: The tolerance unless mentioned is ±0.1mm. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：2 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current(Duty 1/10 @ 1KHz) Power Dissipation 25 Y2 25 R6 60 Y2 60 R6 60 Y2 60 R6 2000 Y2 2000 mA IFP mA Pd Electrostatic Discharge(HBM) Revision R6 IF mW ESD V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +95 ℃ Soldering Temperature Tsol Reflow soldering：260 ℃ for 10 sec. Hand soldering：350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：3 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol R6 IV Y2 2θ1/2 Peak Wavelength λp Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current IR Min. 72 Typ. ----------- Max. Unit 285 mcd deg ----- 120 ----- R6 ----- 632 ----- Y2 ----- 591 ----- R6 621 ----- 631 Y2 586 ----- 594 R6 ----- 20 ----- Y2 ----- 15 ----- 1.75 ----- 2.35 V ----- ----- 10 μA R6 Y2 R6 Y2 Condition nm IF=20mA nm nm VR=5V Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：4 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Bin Range of Luminous Intensity Symbol Bin Code Min. Max. Q1 72 90 Q2 90 112 R1 112 140 R2 140 180 S1 180 225 S2 225 285 Q1 72 90 Q2 90 112 R1 112 140 R2 140 180 S1 180 225 S2 225 285 R6 Y2 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Bin Range of Dominant Wavelength Symbol Bin Code Min. Max. FF1 621 626 FF2 626 631 DD1 586 588 DD2 588 590 DD3 590 592 DD4 592 594 R6 Y2 Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：5 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Typical Electro-Optical Characteristics Curve (R6) Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 550 600 650 700 Wavelength λ (nm) 40 30 20 10 0 750 1.4 Relative luminous intensity (%) Relative luminous intensity (%) 2.0 2.2 Forward Current 100 10 0 20 40 60 80 100 1000 2.4 Ta=25°C f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 1.8 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. 1000 Ta=25°C 50 40 Ta=25°C 20° 30° 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) Revision 80° 90° 0.5 Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page：6 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Typical Electro-Optical Characteristics Curves (Y2) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 75 50 25 0 500 550 600 650 Wavelength λ (nm) 20 10 1.2 100 10 1.6 2.0 f=1KHz Duty=1/10 100 10 1 0 10 0 20 40 60 80 100 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current I (mA) F 50 0° 10° 3 10 Ta=25°C 20° 30° 40 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 80° 90° 20 40 60 80 100 Ambient Temperature Ta (°C) 0.5 0.3 Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 LifecyclePhase: 3.0 1000 Forward Current Derating Curve :1 2.8 Relative Luminous Intensity vs. Forward Current Ta=25°C Ambient Temperature T a (°C) Revision 2.4 Forward Voltage VF (V) Relative luminous intensity (%) Relative luminous intensity (%) 30 0 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 40 700 1000 Ta=25°C 0.1 Rev. 1 0.2 0.4 0.6 Page：7 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：8 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: The tolerance unless mentioned is ±0.1mm. Moisture Resistant Packaging Label Revision Aluminum moistue-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Label Page：9 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Revision No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃Min. 10sec. 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH. 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：10 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：11 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No.：DSE-672-120 Prepared date：31-Jan.-2008 :1 LifecyclePhase: Rev. 1 Page：12 of 12 Prepared by：Rita Shen Release Date:2008-09-20 00:15:58.0 Expired Period: Forever