EVERLIGHT ELECTRONICS CO.,LTD Technical Data Sheet Bi-Color (Multi-Color) Top LEDs 67-22UYSYGC/S530-A5/TR8 Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-22 series is available in soft orange, green, blue and yellow.Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector, this feature makes the ideal for light pipe application.The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlight in dashboards and switches. ․Telecommunication: indicator and backlight in elephone and fax. ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Type Material Emitted Color UY AlGaInP Brilliant Yellow SYG AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Water Clear Rev. 2 Page: 1 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Package Dimensions CL 2 1 4 3 2 4 1 UY SYG 2.8±0.2 3 0.7±0.1 2.2±0.1 CL 3.2±0.2 3.5±0.2 0.15±0.05 0.8±0.1 1.9±0.2 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Notes: 1.All dimensions are in millimeters 2.Tolerances Unless Dimension = ±0.1mm Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 2 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V UY Forward Current 25 IF mA SYG 25 UY 60 Peak Forward Current IFP mA (Duty 1/10 @1KHz) Power Dissipation SYG 60 UY 60 Pd Electrostatic Discharge(HBM) mW SYG 60 UY 2000 ESD V SYG 2000 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Reflow Soldering : 260 ℃ for 10 sec Hand Soldering : 350 ℃ for 3 sec. Rev. 2 Page: 3 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Electro-Optical Characteristics @ Ta=25℃ Parameter Luminous Intensity Viewing Angle Symbol Min. Typ. Max. Unit UY 80 120 ----- mcd SYG 50 80 ----- mcd ----- 120 ----- deg IF=20mA ----- 591 ----nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V IF=20mA IV 2θ1/2 UY Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Everlight Electronics Co., Ltd. Device No. DSE-672-064 Condition λp SYG ----- 575 ----- UY ----- 589 ----- λd △λ SYG ----- 573 ----- UY ----- 15 ----- SYG ----- 20 ----- UY ----- 2.0 2.4 SYG ----- 2.0 2.4 ----- ----- 10 VF IR http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 4 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Typical Electro-Optical Characteristics Curves (UY) Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 5 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Typical Electro-Optical Characteristics Curves (SYG) Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 6 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYSYGC/S530-A5/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 7 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYSYGC/S530-A5/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Desiccant Rev. 2 Label Page: 8 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 min 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA/ 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 9 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22 UYSYGC/S530-A5/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. DSE-672-064 http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 10 o11 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYSYGC/S530-A5/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. DSE-672-064 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date:19-Jul-2006 Rev. 2 Page: 11 o11 Prepared by:Rita Shen