RI-CTL-MB2A, RI-CTL-MB6A www.ti.com SCBS846 – JANUARY 2003 SERIES 2000 CONTROL MODULE FEATURES APPLICATIONS • • • • • • • • • • Best in Class Performance Through Patented HDX Technology RS232 Interface Multi Purpose I/Os Proven in Harsh Industrial Environments Easy to Install and Use Access Control Vehicle Identification Container Tracking Asset Management Waste Management DESCRIPTION The Texas Instruments' low-frequency (LF) reader provides all the functionality required to communicate with Texas Instruments 134.2 kHz LF transponders which are available in a variety of form factors. The Series 2000 Control Module (CTL) is the interface between a TI-RFid™ Radio Frequency Module and a controlling host. The CTL controls the transmitting and receiving functions of an RFM module such as the RI-RFM-003B, RI-RFM-007B or RI-RFM-008B according to the commands from the host to send signals to and receive data from a TI-RFid™ LF transponder. It converts the received RF signals to the transponder's identification number, checks the validity and handles the conversion to the standard RS232 (RI-CTL-MB2A) or the RS422/485 (RI-CTL-MB6A) serial interface protocol. The CTL in combination with an RFM module is well suited for usage in a broad range of applications including, but not limited to, access control, vehicle identification, container tracking, asset management and waste management applications Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. TI-RFid is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2003, Texas Instruments Incorporated RI-CTL-MB2A, RI-CTL-MB6A www.ti.com SCBS846 – JANUARY 2003 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) RI-CTL-MB2A Operating Temperature Storage Temperature (1) RI-CTL-MB6A UNIT 0 to +70 °C –40 to +85 °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) RI-CTL-MB2A, RI-CTL-MB6A Power Supply 7 to 25 Vdc, regulated OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PART NUMBER PARAMETER RI-CTL-MB2A Memory 64 kbyte PROM for Code 1 kbit EEPROM for Configuration 32 kByte RAM for Data Data Storage (ID Codes) 909 Communication Interface System Architecture 2 RI-CTL-MB6A RS232 RS422/485 Point-to-point Point-to-multipoint Communication Protocols ASCII with Xon/Xoff handshake; TI-RFid™ Bus Protocol Communication Parameters 600 – 57600 Baud, 7/8 data bits, even/odd parity Input / Output 8 configurable digital I/O’s, 2 open collector outputs Connector Type Standard connector ‘Combicon Type’ from Phoenix Contact Operation with Series 2000 Standard RFM (RI-RFM-104B) Series 2000 High Performance RFM (RI-RFM-007B) Series 2000 Remote Antenna RFM (RI-RFM-008B) Reference Documentation 11-06-21-037 Reference Guide Series 2000 Control Module RI-CTL-MB2A 11-06-21-056 Reference Guide Series 2000 Standard Reader RI-STU-MB2A/MB6A 11-06-21-042 (SCBU022) Reference Guide Series 2000 High Performance RFM RI-RFM-007B 11-06-21-047 (SCBU023) Reference Guide Series 2000 Remote Antenna RFM RI-RFM-008B Dimensions 93 mm × 82 mm × 33 mm ± 1.5mm Weight approx. 90g Approval CE Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 31-Jan-2007 PACKAGING INFORMATION Orderable Device Status (1) RI-CTL-MB2A-03 ACTIVE Package Type Package Drawing Pins Package Eco Plan (2) Qty 1 1 TBD Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated