FS fact sheet MB86C31 USB 3.0-SATA Bridge IC USB 3.0 PHY (Device) USB 3.0 Link (Device) AES USB 2.0 480Mbps USB 2.0 PHY (Device) USB 2.0 Link (Device) GPIO SPI SATA Link (Host) Internal Bus USB 3.0 5Gbps SATA PHY (Device) SATA 3Gbps MPU SRAM LED etc. Serial Flash ROM MB86C311A Block Diagram Description0 The Fujitsu USB 3.0 external storage solution is the bridge IC that connects USB 3.0 and SATA, ATA and ATAPI devices. Its USB 3.0 interface delivers super-high-speed data transfer of up to 5Gbps between the host PC and SATA storage devices such as HDD, SSD and Blu-ray. Embedded with a high-performance 32-bit RISC processor for interaction with the USB host, the Fujitsu USB 3.0 LSI family complies with Universal Serial Bus Specification 3.0 Revision 1.0 and is backwards compatible with Universal Serial Bus Specification Revision 2.0. The Fujitsu MB86C31 features available high-speed encryption hardware support, USB PHY for robust connectivity, and UAS (USB-attached SCSI) in addition to BOT (Bulk-Only Transport). The IC also supports both GPIO interfaces for design flexibility and a SPI interface for serial Flash ROM, which supports plural SPI devices. Applications0 USB 3.0 external storage application using SATA devices: • HDD with encryption function • SSD • SSD with encryption function • Blu-ray • HDD • DVD MB86C31 USB 3.0-SATA Bridge IC HDD System Diagram Key Features0 • SuperSpeed (5Gbps), high-speed (480Mbps) and full speed (12Mbps) • Integrated high-performance 32bit RISC MPU Support for customized functions such as VID/PID • UAS protocol transport • Integrated high-speed encryption hardware: AES (MB86C311A only) • Mass Storage Class Bulk-Only Transport • NCQ function • HID class (firmware option) • SATA Gen2i (3Gbps) and Gen1i (1.5Gbps) HID class (firmware option) • IEEE 1667 (firmware option) • Support for 10 GPIOs (LQFP) and 9 GPIOs (QFN), including PWM • Support for SPI for serial Flash ROM and plural SPI devices • SATA Gen2i (3Gbps) and Gen1i (1.5Gbps) Support for ATA and ATAPI devices • Embedded SSCG for SuperSpeed and EMI reduction • Support for hot-plugging of ATA devices • Two packages available: 64-pin LQFP (7mm x 7mm) and 48-pin QFN (6mm x 6mm) • Support for port-multiplier device • ATA command pass-through function • Support for hard disk drives 2TB and larger • Only one external crystal (25MHz) required • 65nm CMOS technology • Pb-free (RoHS) • Support for 4KB sector hard disk drives 8 Fujitsu SEMICONDUCTOR America, Inc. Corporate Headquarters 1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401 Tel: (800) 866-8608 Fax: (408) 737-5999 E-mail: [email protected] | Website: http://us.fujitsu.com/semi © 2010 Fujitsu Semiconductor America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Printed in the U.S.A. USB-FS-21371-08/2010