FR15, GHR16 Photoflash Rectifiers Reverse Voltage 1500-1600 Volts Forward Current 0.3/0.5 Ampere Features Fast switching Low leakage High forward surge current capability Mechanical Data Case: R-1 molded epoxy with UL94V-0 flammability classification Polarity: Color band denotes cathode end Weight: 0.0073 ounce, 0.2 gram Terminals: High temperature soldering guaranteed: 260oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Parameter Symbols F R 15 GHR16 Units Maximum repetitive peak reverse voltage VRRM 1500 1600 Volts Maximum RMS voltage VRMS 1050 1120 Volts Maximum DC blocking voltage V DC 1500 1600 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55oC IF(AV) 300 500 mAmps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 15.0 20.0 Amps Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TL=55oC IR(AV) - 100 uA Maximum instantaneous forward voltage drop at 0.5A VF Maximum DC reverse current at rated DC blocking voltage at TA=25oC IR 10.0 5.0 uA Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 500 300 ns Typical junction capacitance at 4.0V, 1MHz CJ Operating junction and storage temperature range TJ, TSTG 1.5 Volts 10 -55 to +125 735 pF -55 to +150 o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 736