1N5391 thru 1N5399 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.5 Amperes Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High surge current capability 1.5 Amperes operation at TL=70oC with no thermal runaway Low reverse leakage Construction utilizes void-free molded plastic technique High temperature soldering guaranteed: 250oC/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: JEDEC DO-204AC(DO-15)/DO-204AL(DO-41), molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: DO-15 - 0.014 ounce, 0.39 gram DO-41 - 0.012 ounce, 0.34 gram Note: Package is DO-204AL(DO-41) for suffix "L" part numbers Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Symbols 1N 5391 1N 5392 1N 5393 1N 5394 1N 5395 1N 5396 1N 5397 1N 5398 1N 5399 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 Volts Parameter Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 300 400 500 600 800 1000 Volts Maximum average forward rectified current 0.500" (12.7mm) lead length at TL=55oC IF(AV) 1.5 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=50oC IFSM 50.0 Amps Maximum full load reverse current full cycle average, 0.375" (9.5mm) lead length at TL=70oC IR(AV) 300 uA Maximum instantaneous forward voltage at 1.5A, TA=70oC VF 1.4 Volts IR 5.0 300 uA trr 1.0 uS pF Maximum DC reverse current at rated DC blocking voltage TA=25oC TA=150oC Typical reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (NOTE 1) Maximum DC blocking voltage temperature Operating junction temperature range Storage temperature range Notes: CJ 15.0 RθJA RθJL 50.0 25.0 TA +125 o C TJ -55 to +125 o C TSTG -55 to +150 o C 1. Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 53 o C/W RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 54