DIP Switches Tri-State Slide Type DIP Switches DX3 Series 5.90 MAX 0.80 1.10 1.30 2.54 x (N - 1) + 6.52 1.80 0.60 2.54 x (N - 1) 0.25 ± 0.05 Ø0.80 ± 0.05 7.62 ± 0.10 2.54 x (N - 1) ± 0.10 P.C.B. LAYOUT DX3N Standard THT Terminals 0.50 3.20 MIN 10.0 3.3 CIRCUIT DIAGRAM 2.54 TYP. DX3NRA 6.50 ± 0.50 7.62 ± 0.50 2.54 P.C.B. LAYOUT 1.10 0.60 9.80 CIRCUIT DIAGRAM 0.60 2.54 x (N - 1) ± 0.10 8.20 10.80 7.00 DX5SRA: 0.40 DX5SRC: 0 2.54 x (N - 1) 2.54 2.40 DIP Switches 1.85 3.60 2.54 x (N - 1) + 3.7 DX3SRA 1.85 0.50 2.54 0.60 3.60 DX3S Low Profile SMT Terminals 2.54 x (N - 1) 2.54 x (N - 1) + 3.7 DX5HRA: 0.40 DX5HRC: 0 7.00 2.40 2.54 x (N - 1) ± 0.10 2.54 Ø 0.80 DX3H Low Profile THT Terminals How to order: DX3 1 N S H 1 2 3 08 09 10 4 5 FEATURES » Setting ( +, 0, - ) function, much more security code options MATERIALS TYPE OF DIP-SWITCH: Standard THT Tri-State DIP Switch Low Profile SMT Tri-State DIP Switch Low Profile THT Tri-State DIP Switch ACTUATOR TYPE: RA Raised Actuator RC Recessed Actuator (Only DX3S & DX3H) 04 06 7.62 DX3HRA General Specifications: 2 3 7.62 P.C.B. LAYOUT CIRCUIT DIAGRAM NO. OF POSITIONS: 4 Positions 6 Positions (Only DX3S & DX3H) 8 Positions 9 Positions 10 Positions » Contact: Alloy copper with gold plated » Terminal: Brass with tin plated (DX3N) Brass with gold plated (DX3S & DX3H) MECHANICAL » Mechanical Life: 2,000 operations per switch SEAL: N No Tape (Standard) T Top Tape Sealed (Only DX3SRC & DX3HRC) » Operation Force: 1,000 gf max. PACKAGE STYLE: TB Tube TR Tape & Reel (Only DX3S) ELECTRICAL 4 5 » Stroke: 1.0 mm (DX3N Series); 0.8 mm (DX3S & DX3H) » Operation Temperature: -20°C to +70°C (DX3N) -20°C to +85°C (DX3S & DX3H) » Storage Temperature: -40°C to +85°C » Electrical Life: 2,000 cycles » Non-Switching Rating: 100mA, 50VDC » Switching Rating: 25mA, 24VDC » Circuit: 3 switching positions LEADFREE SOLDERING PROCESSES » Wave Soldering: Recommended solder temperature at 260°C max. 5 seconds » Reflow Soldering: When applying reflow soldering, the peak temperature of the N = No. of positions F03 General Tolerance: ± 0.2 mm [email protected] reflow oven should be set to 260°C, max. 10 seconds. www.greatecs.com