FR101G-E THRU FR107G-E FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE: 50 to 1000V CURRENT: 1.0A FEATURE DO- 41\DO-204AL Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed Fast switching for high efficiency Glass passivated junction Halogen Free MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Halogen Free Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FR10 1G-E 50 35 50 FR10 2G-E 100 70 100 FR10 3G-E 200 140 200 FR10 4G-E 400 280 400 FR10 5G-E 600 420 600 FR10 6G-E 800 560 800 FR10 7G-E 1000 700 1000 units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc Maximum Average Forward Rectified Current 3/8”lead length at Ta =75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ If(av) 1.0 A Ifsm 30.0 A Vf 1.3 V Ir 5.0 100.0 µA Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Trr Cj Rth(ja) Tstg,Tj 150 250 500 15.0 50.0 -50 to +150 Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com V V V nS pF ℃/W ℃ RATINGS AND CHARACTERISTIC CURVES FR101G-E THRU FR107G-E Rev.A1 www.gulfsemi.com