EG1AE THRU EG1JE GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE： ：50 TO 1000V CURRENT： ： 0.7A FEATURE A - 405 Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 50HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Vrrm Maximum RMS Voltage Vrms Maximum DC blocking Voltage Vdc Maximum Average Forward Rectified Current 3/8″lead length at Ta =55℃ Peak Forward Surge Current 10ms single half sine-wave superimposed on rated load Maximum Forward Voltage Maximum DC Reverse Current at rated DC blocking voltage Ta =25℃ Ta =125℃ Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature EG1 AE 50 35 50 EG1 BE 100 70 100 EG1 DE 200 140 200 EG1 GE 400 280 400 EG1 JE 600 420 600 units V V V If(av) 1.0 0.7 0.5 A Ifsm 30 15 10 A Vf 1.2 IF=1.0A 2.0 IF=0.7A 2.0 IF=0.5A V 10.0 200.0 50 Ir Trr Cj Rth(ja) Tstg,Tj 20 μA μA nS 10 20.0 -55 to +150 pF ℃/W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8″lead length, P.C. Board Mounted Rev.5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES Rev.5 EG1AE THRU EG1JE www.gulfsemi.com