1N5400G-E THRU 1N5408G-E GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 50V to 1000V CURRENT: 3.0A FEATURE DO - 201AD Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip Halogen Free MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 Halogen Free Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 1N 540 0GE 50 35 50 1N 540 1GE 100 70 100 1N 540 2GE 200 140 200 1N 540 3GE 300 210 300 1N 540 4GE 400 280 400 1N 540 5GE 500 350 500 1N 540 6GE 600 420 600 1N 540 7GE 800 560 800 1N 540 GE 1000 700 1000 units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc Maximum Average Forward Rectified Current 3/8" lead length at TL =105°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note 1) Operating Temperature (Note 2) Storage and Operating Junction Temperature If(av) 3.0 A Ifsm 180 A Vf 1.1 V Ir(av) 30.0 µA Ir Cj Rth(ja) Tstg, Tj 5.0 100.0 40 30 -55 to +150 V V V µA pF °C/W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N5400G-E THRU 1N5408G-E Rev.A2 www.gulfsemi.com