Photosensor Modules H7732 Series The H7732 series photosensor modules consist of a 28-mm (1-1/8") diameter side-on photomultiplier tube and a high-voltage power supply. These side-on photomultiplier tubes have long been used for spectroscopic applications and provide high gain and high sensitivity. Five types of photomultiplier tubes are provided as standard lineups to meet various needs for spectral response range. Connectors are used for power input and signal output. By selecting cables in convenient length, the H7732 can be easily installed inside equipment or removed from equipment. The H7732 is a general-purpose type and the H7732-01 is a low-noise type. The H7732-10 is sensitive over a wide range from UV to near infrared and has particularly high sensitivity in wavelengths above 600 nm. The H7732P01 and H7732P-11 are selected as low dark count types ideal for photon counting and low-light-level measurement. Product Variations Type No. H7732 H7732-01 Spectral Response 300 nm to 650 nm 185 nm to 680 nm H7732-10 185 nm to 900 nm H7732P-01 H7732P-11 185 nm to 680 nm 185 nm to 850 nm Features For general applications in visible range Low noise in UV to visible range High sensitivity in UV to near IR range. Uses photomultiplier tube with meshless grid for excellent uniformity. For photon counting Specifications Anode Cathode Parameter Input Voltage Max. Input Voltage Max. Input Current Max. Output Signal Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Typ. Red/White Ratio Typ. Radiant Sensitivity *1 Typ. Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Typ. Typ. Dark Current *2 *3 Max. Typ. Dark Count *3 *4 Max. Typ. Rise Time *2 Ripple Noise *2 *5 (peak to peak) Max. Max. Settling Time *6 Operating Ambient Temperature *7 Storage Temperature *7 Weight H7732 30 60 7.1 — 60 50 600 6.0 × 105 5 50 — — H7732-01 H7732P-01 H7732-10 +11.5 to +15.5 +18 40 100 +1.2 (Input impedance 100 kΩ) +0.3 to +1.1 4 × 20 1: 104 400 40 40 140 60 60 250 6.4 6.4 — — — 0.3 60 60 74 200 200 400 400 400 2500 4.0 × 105 4 × 105 7.4 × 105 0.1 3 0.1 2 50 0.5 — — 30 — — 80 2.2 0.5 0.2 +5 to +45 -20 to +50 220 H7732P-11 430 140 200 — 0.15 80 300 700 2.8 × 105 0.2 1 80 200 Unit V V mA µA V V mm — nm µA/lm — — mA/W A/lm A/W nA s-1 ns mV s °C °C g *1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minutes storage in darkness *4: Control voltage: Plateau voltage *5: Cable RG-174/U, Cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF *6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7: No condensation HAMAMATSU PHOTONICS K.K. JAN.2008 Characteristics (Cathode radiant sensitivity, Gain) TPMOB0141EB 100 108 H7732P-11 TPMOB0142EB CATHODE RADIANT SENSITIVITY (mA/W) H7732-10 107 H7732 106 10 H7732 GAIN H7732-10 H7732-01 H7732P-01 H7732P-11 105 104 1 H7732-01, H7732P-01 103 102 0.25 0.3 0.1 100 200 300 400 500 600 700 800 900 1000 0.4 0.5 0.7 1.0 1.2 1.5 CONTROL VOLTAGE (V) WAVELENGTH (nm) Sensitivity Adjustment Method VOLTAGE PROGRAMMING RESISTANCE PROGRAMMING POWER SUPPLY SIGNAL OUTPUT LOW VOLTAGE INPUT(RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) SIGNAL OUTPUT LOW VOLTAGE INPUT(RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) +15 V GND +15 V GND MONITOR +0.3 V to +1.1 V • Electrically insulate the reference voltage output. • Adjust the control voltage to adjust the sensitivity. POWER SUPPLY PHOTOSENSOR MODULE CW PHOTOSENSOR MODULE POTENTIOMETER (10 kΩ) When using a potentiometer, adjust sensitivity while monitoring the control voltage. GND TPMOC0148EC Dimensional Outlines (Unit: mm) 50.0 ± 0.5 1: GND 2: LOW VOLTAGE INPUT (+15 V) 3: Vcont INPUT (+0.3 V to +1.1 V) 4: Vref OUTPUT (+1.2 V) 5: GND 6: NC +1.0 2.5 -0 MOUNTING THREADED HOLE (2 × 2-M3 DEPTH: 10) FRONT VIEW SIDE VIEW SIGNAL OUTPUT BNC-R REAR VIEW WINDOW +2 20 -0 55.0 ± 0.5 8 WINDOW PHOTOCATHODE Power cable with connector (HIROSE HR10A-7P-6S) is supplied with the H7732 series 700 ± 20 +0.5 1.5 -0 EFFECTIVE AREA (4 × 20) 4.5 ± 0.3 MOUNTING THREADED HOLE (4-M3 DEPTH: 10) DETAILS OF INPUT WINDOW 34.0 ± 0.8 85.0 ± 0.5 95.0 ± 1.0 55.0 ± 0.5 24.0 +0.5 -0 87.0 ± 0.5 19.0 ± 0.5 8.0 +0.5 -0 POWER INPUT HIROSE HR10A-7R-6P 10.0 ± 0.5 17.2 ± 0.5 EFFECTIVE AREA (4 × 20) 23.0 ± 0.8 27.0 ± 0.5 5.0 ± 0.5 38.0 ± 0.5 R3 TOP VIEW BLACK : GND RED : LOW VOLTAGE INPUT (+15 V) WHITE : Vcont INPUT (+0.3 V to +1.1 V) BLUE : Vref OUTPUT (+1.2 V) GREEN : NC TPMOA0004EE FRONT VIEW TPMOC0123EC