HMC219MS8 / 219MS8E v04.0709 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 1 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Typical Applications Features The HMC219MS8 / HMC219MS8E is ideal for: Ultra Small Package: MSOP8 • UNII & HiperLAN Conversion Loss: 8.5 dB • ISM LO / RF Isolation: 25 dB ns g i s De • Microwave Radios Functional Diagram ew N r fo d e d Description enGeneral m com The HMC219MS8 & HMC219MS8E are ultra miniature e R t o double-balanced mixers in 8 lead plastic surface N mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifi cations, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. Typ. LO = +11 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 4.5 - 9.0 4.5 - 8.6 GHz Frequency Range, IF DC - 2.5 DC - 2.5 GHz Conversion Loss 8.5 10 8.5 10 dB Noise Figure (SSB) 8.5 10 8.5 10 dB LO to RF Isolation 17 25 20 25 dB LO to IF Isolation 17 25 20 25 dB IP3 (Input) 15 21 15 21 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC219MS8 / 219MS8E v04.0709 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Conversion Loss vs Temperature @ LO = +13 dBm 0 0 -10 -10 -20 -30 wD e N or f d de n e mm o c Re t o N -40 C +25 C +85 C -15 -40 RF/IF LO/IF LO/RF -50 5 6 7 8 9 4 10 5 6 FREQUENCY (GHz) 7 8 9 10 FREQUENCY (GHz) Conversion Loss vs. LO Drive Return Loss @ LO = +13 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION LOSS (dB) ns g i s e -60 4 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 -10 -15 RF IF LO -20 -20 -25 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) P1dB vs. Temperature LO = +13 dBm IF Bandwidth @ LO = +13 dBm 12.5 0 12 -40 C +25 C +85 C -5 11.5 P1dB (dBm) CONVERSION LOSS (dB) 10 -20 -10 11 10.5 -15 MIXERS - SINGLE & DOUBLE BALANCED - SMT -5 ISOLATION (dB) CONVERSION LOSS (dB) Isolation @ LO = +13 dBm 10 -20 9.5 9 -25 0 0.5 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 4 4 5 6 7 8 9 10 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 2 HMC219MS8 / 219MS8E v04.0709 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Input IP3 vs. Temperature @ LO = +13 dBm Input IP3 vs. LO Drive 24 28 23 10 - 3 INPUT IP3 (dBm) 24 22 18 22 21 20 ew N r fo d e end m com e R Not +11 dBm +13 dBm +15 dBm 20 19 ns g i s De -40 C +25 C +85 C 18 17 4 5 6 7 8 9 4 10 5 LO FREQUENCY (GHz) 6 7 8 9 10 9 10 LO FREQUENCY (GHz) Input IP2 vs. Temperature @ LO = +13 dBm Input IP2 vs. Drive 55 55 50 50 +11 dBm +13 dBm +15 dBm 45 INPUT IP2 (dBm) INPUT IP2 (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 INPUT IP3 (dBm) 26 40 35 -40 C +25 C +85 C 45 40 35 30 30 25 4 5 6 7 8 LO FREQUENCY (GHz) 9 10 4 5 6 7 8 LO FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC219MS8 / 219MS8E v04.0709 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Harmonics of LO nLO nLO Spur at RF Port 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 12.2 22.3 20.7 33.9 4.0 33 29 39 54 1 13.2 0 36.9 36.7 49.5 5.0 31 23 34 47 2 79.8 53.7 47.7 55.4 68.1 6.0 35 21 40 55 3 >105 >105 78.1 65.5 83.1 7.0 31 26 53 xx 4 >105 >105 >105 98.1 87.1 8.0 27 32 54 xx 9.0 21 43 xx xx mRF wD e N or f d de n e mm o c Re t o N RF = 6 GHz @ -10 dBm LO = 6.1 GHz @ +13 dBm All values in dBc below the IF power level (-1RF + 1LO). ns g i s e LO = +13 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT MxN Spurious Outputs 10 - 4 HMC219MS8 / 219MS8E v04.0709 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Outline Drawing MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 5 ew N r fo d e end m com e R Not ns g i s De NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC219MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC219MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H219 XXXX [2] H219 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC219MS8 / 219MS8E v04.0709 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz D E U N I T N O T C C S U I D D O PR Evaluation Circuit Board List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC219MS8 / HMC219MS8E Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT wD e N or f d de n e mm o c Re t o N ns g i s e 10 - 6