HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 10 DOUBLE-BALANCED MIXER, 9 - 15 GHz Typical Applications Features The HMC412MS8G / HMC412MS8GE is ideal for: Conversion Loss: 8 dB • Long Haul Radio Platforms Noise Figure: 8 dB • Microwave Radio Input IP3: 17 dBm • VSAT No External Components Mixers - SINGLE & DOUBLE BALANCED - SMT MSOP8G SMT Package Functional Diagram Re t o N end m com ew N r o ed f ns g i s De General Description The HMC412MS8G & HMC412MS8GE are passive double balanced mixers that operate between 9.0 GHz and 15 GHz. The HMC412MS8G(E) operate with LO drive levels between +9 dBm and +13 dBm, and provides 8 dB conversion loss across the entire specified frequency band. This mixer requires no external components or bias. Electrical Specifications, TA = +25° C IF = 1.45 GHz LO = +13 dBm Parameter Min. Typ. Units Max. Frequency Range, RF & LO 9.0 - 15.0 GHz Frequency Range, IF DC - 2.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF Isolation 30 40 - 50 dB LO to IF Isolation 33 40 - 50 dB RF to IF Isolation 8 17 dB IP3 (Input) 14 17 dBm 1 dB Compression (Input) 7 9.5 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 DOUBLE-BALANCED MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +13 dBm 0 Isolation @ LO = +13 dBm 0 +25 C -40 C +85 C -15 -20 -30 wD e N or f d e -40 -50 9 10 11 12 13 14 15 e ot R FREQUENCY (GHz) N end m com 16 Conversion Gain vs. LO Drive 8 9 10 11 12 13 14 15 16 14 15 16 15 16 FREQUENCY (GHz) Return Loss @ LO = +13 dBm 0 0 -5 RETURN LOSS (dB) -5 -10 LO = +7 dBm LO = +9 dBm LO = +11 dBm LO = +13 dBm LO = +15 dBm -15 -10 -15 RF LO -20 -25 -20 8 9 10 11 12 13 14 15 8 16 9 10 11 12 13 FREQUENCY (GHz) FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +13 dBm IF Bandwidth @ LO = +13 dBm 0 0 Conversion Gain Return Loss CONVERSION GAIN (dB) -5 RESPONSE (dB) 10 ns g i s e RF/IF LO/RF LO/IF -60 8 CONVERSION GAIN (dB) -20 -10 -15 -20 -25 -30 -5 -10 Mixers - SINGLE & DOUBLE BALANCED - SMT -10 ISOLATION (dB) CONVERSION GAIN (dB) -10 -5 -15 -20 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 8 9 10 11 12 13 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 2 HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 DOUBLE-BALANCED MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +13 dBm* Input IP3 vs. LO Drive* 30 LO = +11 dBm LO = +13 dBm LO = +15 dBm 20 15 +25 C -40 C +85 C 25 IP3 (dBm) IP3 (dBm) 25 20 ew N r o ed f ns g i s De 15 10 end m com 10 9 10 11 12 13 14 FREQUENCY (GHz) N 15 16 e ot R 17 9 10 11 12 13 14 15 16 17 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +13 dBm Input IP2 vs. LO Drive * 15 70 13 P1dB (dBm) 60 IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 30 50 LO = +11 dBm LO = +13 dBm LO = +15 dBm 40 11 9 +25 C -40 C +85 C 7 5 30 9 10 11 12 13 14 15 16 17 8 9 10 11 MxN Spurious @ IF Port 0 1 13 14 15 16 Harmonics of LO nLO mRF 12 FREQUENCY (GHz) FREQUENCY (GHz) nLO Spur @ RF Port 2 3 4 LO Freq. (GHz) 1 2 3 4 70.5 0 XX 16 27 38 N/A 9 36 30 58.3 1 7 0 >85 57 56 10.5 34.8 31.3 35.7 57.5 2 78 >85 72 71 >85 12 49.5 44.5 65.2 68.7 3 >85 >85 >85 78 >85 13.5 48.7 58.8 69 N/A 4 N/A >85 >85 >85 >85 15 39.2 74.5 64 N/A 16.5 34 61.3 60.3 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +13 dBm All values in dBc relative to the IF. Measured as downconverter. LO = +13 dBm All values in dBc below input LO level @ RF port. * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 10 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 DOUBLE-BALANCED MIXER, 9 - 15 GHz Absolute Maximum Ratings +27 dBm LO Drive (Vdd = +3V) +27 dBm IF DC Current ±4 mA Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1A Outline Drawing Re t o N ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS end m com wD e N or f d e ns g i s e NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC412MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC412MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 10 Mixers - SINGLE & DOUBLE BALANCED - SMT RF / IF Input (Vdd = +3V) Package Marking [3] H412 XXXX H412 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 4 HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 DOUBLE-BALANCED MIXER, 9 - 15 GHz Pin Descriptions Pin Number 10 1, 8 Mixers - SINGLE & DOUBLE BALANCED - SMT 2 10 - 5 3, 4, 6 Function Description GND Ground: Pin must connect to RF ground. LO This pin is AC coupled and matched to 50 Ohms. N/C end m com Not Connected Re t o N Interface Schematic ew N r o ed f 5 IF IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 7 RF This pin is AC coupled and matched to 50 Ohms. ns g i s De For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412MS8G / 412MS8GE D E U N I T N O T C C S U I D D O PR v02.0607 DOUBLE-BALANCED MIXER, 9 - 15 GHz Evaluation PCB List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC412MS8G / HMC412MS8GE Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Re t o N end m com wD e N or f d e ns g i s e 10 - 6