HMC220AMS8 / 220AMS8E v00.0211 MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 1 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Typical Applications Features The HMC220AMS8 / HMC220AMS8E is ideal for: Ultra Small Package: MSOP8 • Microwave Radios Conversion Loss: 8.5 dB • VSAT Wideband IF: DC - 4 GHz Functional Diagram General Description The HMC220AMS8 & HMC220AMS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. Typ. LO = +13 dBm IF = 100 MHz Max. Min. Typ. LO = +10 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 5 - 10 10 - 12 5.9 - 10 GHz Frequency Range, IF DC - 4 DC - 4 DC - 3.5 GHz Conversion Loss 7.0 10 8.5 10.5 7.5 10 dB Noise Figure (SSB) 7.0 10 8.5 10.5 7.5 10 dB LO to RF Isolation 17 25 13 18 17 25 dB LO to IF Isolation 20 28 14 20 20 28 dB IP3 (Input) 14 17 16 21 13 16 dBm 1 dB Gain Compression (Input) 4 8 4 8 5 8 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Conversion Gain vs Temperature @ LO = +10 dBm Isolation @ LO = +10 dBm 0 ISOLATION (dB) CONVERSION GAIN (dB) -5 -5 -10 -40 C +25 C +85 C -15 RF/IF LO/IF LO/RF -10 -20 -25 -30 -35 -20 5 6 7 8 9 10 11 12 5 13 6 7 8 9 10 11 12 13 11 12 13 11 12 13 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +10 dBm 0 0 +5 dBm +7 dBm +9 dBm +10 dBm +13 dBm LO RF -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 10 -15 -10 -15 -10 -15 -20 -25 -20 5 6 7 8 9 10 11 12 5 13 6 7 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) IF Bandwidth vs LO Drive Conversion Gain and Return Loss P1dB vs. Temperature LO = +10 dBm 16 0 Conversion Gain -5 12 +10 dBm -10 P1dB (dBm) IF CONVERSION GAIN (dB) RETURN LOSS (dB) +13 dBm -15 8 -40 C +25 C +85 C 4 -20 +13 dBm +10 dBm IF Return Loss -25 MIXERS - SINGLE & DOUBLE BALANCED - SMT 0 0 0 1 2 3 4 IF FREQUENCY (GHz) 5 6 5 6 7 8 9 10 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 2 HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Input IP3 vs. Temperature @ LO = +10 dBm Input IP3 vs. LO Drive 30 10 - 3 +7 dBm +10 dBm +13 dBm -40 C +25 C +85 C 25 INPUT IP3 (dBm) INPUT IP3 (dBm) 25 20 15 20 15 10 10 5 6 7 8 9 10 11 12 13 5 6 7 LO FREQUENCY (GHz) 8 9 10 11 12 13 11 12 13 LO FREQUENCY (GHz) Input IP2 vs. Temperature @ LO = +10 dBm Input IP2 vs. LO Drive 50 50 45 INPUT IP2 (dBm) 40 INPUT IP2 (dBm) MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 30 30 20 +7 dBm +10 dBm +13 dBm 10 -40 C +25 C +85 C 40 35 30 25 20 0 5 6 7 8 9 10 LO FREQUENCY (GHz) 11 12 13 5 6 7 8 9 10 LO FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Harmonics of LO nLO nLO Spur at RF Port mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 3 10 7 54 5.5 29 30 42 69 1 11 0 28 31 35 7 29 27 28 66 2 53 62 53 58 61 8.5 26 35 47 70 3 73 69 74 66 73 10 22 40 44 67 4 > 85 > 85 > 85 > 85 > 85 11.5 18 49 51 66 13 13 63 62 xx RF = 7.5 GHz @ -10 dBm LO = 7.6 GHz @ +10 dBm All values in dBc below the IF power level (-1RF + 1LO) LO = +10 dBm Values in dBc below input LO level measured at the RF port. Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT MxN Spurious Outputs 10 - 4 HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Outline Drawing MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 5 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC220AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC220AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H220A XXXX H220A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC220AMS8 / 220AMS8E v00.0211 GaAs MMIC SMT DOUBLEBALANCED MIXER, 5 - 12 GHz Evaluation Circuit Board List of Materials for Evaluation PCB 101830 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC220AMS8 / HMC220AMS8E Mixer PCB [2] 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 10 - 6