HMC726LC3C v04.1010 HIGH SPEED LOGIC - SMT 3 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Typical Applications Features The HMC726LC3C is ideal for: Supports High Data Rates: up to 14 Gbps • 16 G Fiber Channel Differential or Single-Ended Operation • RF ATE Applications Fast Rise and Fall Times: 19 / 18 ps • Broadband Test & Measurement Low Power Consumption: 230 mW typ. • Serial Data Transmission up to 14 Gbps Propagation Delay: 95 ps • Digital Logic Systems up to 14 GHz Single Supply: -3.3 V • NRZ-to-RZ Conversion 16 Lead Ceramic 3x3 mm SMT Package: 9mm 2 Functional Diagram General Description The HMC726LC3C is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 14 Gbps, and clock frequencies as high as 14 GHz. The HMC726LC3C may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR. All differential inputs to the HMC726LC3C are CML and terminated on-chip with 50 Ohms to the positive supply, GND, and may be DC or AC coupled. The differential CMl outputs are source terminated to to 50 Ohms and may also be AC or DC coupled. Outputs can be connected directly to a 50 Ohm ground-terminated system or drive devices with CML logic input. The HMC726LC3C operates from a single -3.3 V supply and is available in ROHS-compliant 3x3 mm SMT package. Electrical Specifications, TA = +25°C, Vee = -3.3 V Parameter Conditions Power Supply Voltage Typ. Max -3.6 -3.3 -3.0 Units V Power Supply Current 70 mA Maximum Data Rate 14 Gbps Maximum Clock Rate 14 GHz Input Voltage Range -1.5 0.5 V Input Differential Range 0.1 2.0 Vp-p Input Return Loss 10 dB Single-Ended, peak-to-peak 550 mVp-p Differential, peak-to-peak 1100 mVp-p Output High Voltage -10 mV Output Low Voltage -560 mV 19 / 18 ps Output Amplitude Output Rise / Fall Time 3-1 Min. Frequency <14 GHz Differential, 20% - 80% For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Electrical Specifications (continued) Parameter Conditions Output Return Loss Min. Typ. Frequency <14 GHz Max Units 10 Small Signal Gain dB 27 Random Jitter Jr dB rms 0.2 peak-to-peak, 215 -1 PRBS input [1] Deterministic Jitter, Jd Propagation Delay, td ps rms 2 ps, p-p 95 ps DC Current vs. Supply Voltage Output Differential Voltage vs. Supply Voltage [2] [1] 85 DC CURRENT (mA) VOUT DIFFERENTIAL (mVp-p) 1500 80 +25C +85C -40C 75 70 65 60 55 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 1300 1200 1100 1000 -3.7 -2.9 +25C +85C -40C 1400 -3.6 SUPPLY VOLTAGE (V) -3.4 -3.3 -3.2 -3.1 -3 -2.9 -3.1 -3 -2.9 Rise / Fall Time vs. Supply [1] 25 1300 1200 23 RISE/FALL TIME (ps) VOUT DIFFERENTIAL (mVp-p) -3.5 SUPPLY VOLTAGE (V) Output Differential Voltage vs. Frequency [3] 1100 1000 900 tr tf 21 19 17 800 700 2 HIGH SPEED LOGIC - SMT [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output 3 4 6 8 10 12 14 FREQUENCY (GHz) [1] Data rate = 13 Gbps [2] Frequency = 10 GHz 16 15 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 SUPPLY VOLTAGE (V) [3] Vee = -3.3 V For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-2 HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE 3-3 Input Return Loss vs. Frequency 0 0 -5 -5 RETURN LOSS (dB) HIGH SPEED LOGIC - SMT 3 RETURN LOSS (dB) Output Return Loss vs. Frequency -10 -15 -20 -10 -15 -20 -25 -25 -30 -30 0 2 4 6 8 FREQUENCY (GHz) 10 12 14 0 2 4 6 8 10 12 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Eye Diagram 3 HIGH SPEED LOGIC - SMT [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 10 Gbps PN code, Vin = 300 mVp-p differential. Timing Diagram Truth Table Input Notes: A = AP - AN B = BP - BN D = DP - DN Outputs A B D L L L L H L H L L H H H H - Positive voltage level L - Negative voltage level For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-4 HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Absolute Maximum Ratings HIGH SPEED LOGIC - SMT 3 Power Supply Voltage (Vee) -3.75 V to +0.5 V Input Signals -2 V to +0.5 V Output Signals -1.5 V to +1 V Continuous Pdiss (T = 85 °C) (derate 17 mW/°C above 85 °C) 0.68 W Thermal Resistance (Rth j-p) Worst case junction to package paddle 59 °C/W Maximum Junction Temperature 125 °C Storage Temperature -65 °C to +150 °C Operating Temperature -40 °C to +85 °C ESD Sensitivity (HBM) Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND. 3-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Pin Descriptions Function Description 1, 4, 5, 8, 9, 12 GND Signal Grounds 2, 3 6, 7 AN, AP BN, BP Differential Data Inputs, Current Mode Logic (CML) referenced to positive supply. 10, 11 DP, DN Differential Data Outputs, Current Mode Logic (CML) referenced to positive supply. 13, 16 Vee Negative Supply 14, Package Base GND Supply Ground 15 N/C No Connection required. This pin may be connected to RF/DC ground without affecting performance. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3 HIGH SPEED LOGIC - SMT Pin Number 3-6 HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Evaluation PCB HIGH SPEED LOGIC - SMT 3 List of Materials for Evaluation PCB 122520 [1] Item Description J1 - J6 PCB Mount SMA RF Connectors J7, J9 DC Pin C1 4.7 µF Capacitor, Tantalum C5 100 pF Capacitor, 0402 Pkg. U1 HMC726LC3C High Speed Logic, AND / NAND / OR / NOR PCB [2] 122518 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 3-7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC726LC3C v04.1010 14 Gbps, FAST RISE TIME AND / NAND / OR / NOR GATE Application Circuit HIGH SPEED LOGIC - SMT 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-8