HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY HIGH SPEED LOGIC - SMT 3 Typical Applications Features The HMC746LC3C is ideal for: Supports High Data Rates: up to 13 Gbps • RF ATE Applications Differential & Singe-Ended Operation • Broadband Test & Measurement Fast Rise and Fall Times: 22 / 21 ps • Serial Data Transmission up to 13 Gbps Low Power Consumption: 230 mW typ. • Digital Logic Systems up to 13 GHz Programmable Differential Output Voltage Swing: 600 - 1100 mV • NRZ-to-RZ Conversion Propagation Delay: 95 ps Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm2 Functional Diagram General Description The HMC746LC3C is an AND/NAND/OR/NOR function designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC746LC3C may be easily configured to provide any of the following logic functions: AND, NAND, OR and NOR. The HMC746LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input and output signals to the HMC746LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. Inputs and outputs can be connected directly to a 50 Ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC746LC3C operates from a single +3.3V DC supply, and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 °C, Vcc = +3.3V Parameter Conditions Power Supply Voltage Typ. Max 3.0 3.3 3.6 Units V Power Supply Current 70 mA Maximum Data Rate 13 Gbps Maximum Clock Rate 13 GHz Input High Voltage 2.8 3.8 V Input Low Voltage 2.1 3.3 V Input Return Loss Output Amplitude Output High Voltage 3-1 Min. Frequency <13 GHz 10 dB Single-Ended, peak-to-peak 550 mVp-p Differential, peak-to-peak 1100 mVp-p 3.25 V For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Electrical Specifications, (continued) Conditions Min. Typ. Max Units 2 Output Rise / Fall Time Output Return Loss V Differential, 20% - 80% 22 / 21 ps Frequency <13 GHz 10 dB 27 dB Small Signal Gain Random Jitter Jr rms 0.2 peak-to-peak, 215 -1 PRBS input [1] Deterministic Jitter, Jd Propagation Delay, td ps rms 2 ps, p-p 95 ps [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output DC Current vs. Supply Voltage Output Differential vs. Supply Voltage [1] [2] [1] [2] 85 1200 1175 DIFFERENTIAL VOLTAGE (mV) DC CURRENT (mA) 80 +25C +85C -40C 75 70 65 60 55 2.9 3 3.1 3.2 3.3 3.4 SUPPLY VOLTAGE (V) 3.5 3.6 1075 1050 1025 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Output Differential vs. Frequency [1] 25 1300 1200 OUTPUT DIFFERENTIAL (mV) 23 RISE/FALL TIME (ps) 1100 SUPPLY VOLTAGE (V) Rise / Fall Time vs. Supply Voltage [2] 21 tr tf 19 17 15 2.9 1125 1000 2.9 3.7 +25C +85C -40C 1150 3 HIGH SPEED LOGIC - SMT Parameter Output Low Voltage 1100 1000 900 800 700 600 3 [1] VR = +3.3V 3.1 3.2 3.3 3.4 3.5 SUPPLY VOLTAGE (V) 3.6 3.7 2 4 6 8 10 12 14 16 18 FREQUENCY (GHz) [2] Frequency = 13 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-2 HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Rise / Fall Time vs. VR [2] Output Differential vs. VR [2] 25 1200 23 RISE/FALL TIME (ps) +25C +85C -40C 1000 800 600 400 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 19 tr tf 17 15 2.1 3.7 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 VR (V) Input Return Loss vs. Frequency Output Return Loss vs. Frequency -10 0 -5 RETURN LOSS (dB) -15 -10 -15 -20 -20 -25 -30 -25 -30 -35 0 2 4 6 8 10 FREQUENCY (GHz) [1] VR = +3.3V 3-3 21 VR (V) RETURN LOSS (dB) HIGH SPEED LOGIC - SMT 3 DIFFERENTIAL VOLTAGE (mV) 1400 12 14 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [2] Frequency = 13 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Eye Diagram 3 HIGH SPEED LOGIC - SMT [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 13 Gbps PN code. Device is AC coupled to scope. Timing Diagram Truth Table Input Notes: A = AP - AN B = BP - BN D = DP - DN Outputs A B D L L L L H L H L L H H H H - Positive voltage level L - Negative voltage level For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-4 HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Absolute Maximum Ratings HIGH SPEED LOGIC - SMT 3 Power Supply Voltage (Vcc) -0.5V to +3.7V Input Signals Vcc - 2V to Vcc + 0.5V Output Signals +1V to +3.7V Storage Temperature -65°C to +150°C Operating Temperature -40°C to +85°C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND. 3-5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Pin Descriptions Function Description 1, 4, 5, 8, 9, 12 GND Signal Grounds 2, 3 AN, AP Clock / Data Input A 6, 7 BN, BP Clock / Data Input B 10, 11 DP, DN Clock / Data Output 13, 16 Vcc Positive Supply 14, Package Base GND Supply Ground 15 VR Output level control. Output level may be adjusted by applying a voltage to VR per “Output Differential vs. VR” plot. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3 HIGH SPEED LOGIC - SMT Pin Number 3-6 HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Evaluation PCB HIGH SPEED LOGIC - SMT 3 Item Description J1 AN J2 AP J3 BN J4 BP J5 DP J6 DN J7 GND J8 VR J9 Vcc List of Materials for Evaluation PCB 122517 [1] Item Description J1 - J6 PCB Mount SMA RF Connectors J7 - J9 DC Pin JP1 Shorting Jumper C1, C2 4.7 µF Capacitor, Tantalum C3 - C5 100 pF Capacitor, 0402 Pkg. R2 10 Ohm Resistor, 0603 Pkg. U1 HMC746LC3C High Speed Logic, AND / NAND / OR / NOR PCB [2] 122515 Evaluation Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Arlon 25FR 3-7 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC746LC3C v03.1209 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Application Circuit HIGH SPEED LOGIC - SMT 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 3-8