COMPONENTS PRODUCT INFORMATION NEW LED Power Supply Card Edge Type Connector MB-0221-1 December 2010 ES3 Series RoHS Compliant CONNECTOR Cover Screws LEDs Connector LED Mounting Board Connector Heat Sink (Aluminum Die-cast, Converter Board or Similar) Insulation Case (Base) Drawing of Inside of LED Bulb (For Reference) The ES3 Series is a card edge connector for power supply of LED lighting devices that enables direct connection of the converter board and the LED mounting board. It is a 2-position card edge type connector ideal for LED bulb and LED lighting devices. The ES3 Series connectors are available in embossed tape, compatible with SMT mounting. The connector allows reflow solder mounting to the LED mounting board to occur at the same time other parts like LED and SMT components are mounted. JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 1/5 MB-0221-1 Features Low-profile 1.6mm mounting height, designed with consideration for light shielding. Insulator is made of white LCP for heat and light resistance. Direct connection of converter board and LED mounting board allows for reduced assembly work time. Cable-less connection makes reduction in the number of parts possible. SMT type, can be mounted at the same time as other components to the LED mounting board. General Specifications No. of Contacts: 2 pos. Contact Resistance: 60mΩ max. (initial) Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute) Durability: 20 mating cycles Board Insertion Force: 30N max. Rated Current: 1A Rated Voltage: AC, DC 200V Insulation Resistance: 10MΩ min. (after test) Operating Temperature: -40 to+105 Deg. C Materials and Finishes Component Insulator Material / Finish White LCP Contact-R Copper alloy / Sn plating Contact-L Copper alloy / Sn plating Ordering Information ES3 B 002 W F 1 R**** Series Connection B: Bottom Mount Type Reel Product (Note1) Modification Code Connection Area Plating F: Sn plating No. of Contacts Connection to Board W: SMT straight type, without hold-down JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 2/5 MB-0221-1 Drawing Part Number ES3B002WF1 SJ Drawing SJ110395 Unit: mm JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 3/5 MB-0221-1 Unit: mm Applicable Dimensions of Board (SMT Side, for Reference) Applicable Dimensions of Board (Card Side, for Reference) JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 4/5 MB-0221-1 Part Number ES3B002WF1R1000 SJ Drawing SJ110396 Ｂ Unit: mm Ｂ Notice: Products shown in this brochure are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Product Marketing Division Telecommunication devices (Terminals, Mobile Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 devices), AV devices, Household applications, FA Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 5/5