COMPONENTS PRODUCT INFORMATION NEW CONNECTOR micro SIM Card Connector MB-0256-2 October 2014 SF56 Series RoHS Compliant <<Outline>> Smartphones and tablet PC equipping micro SIM (3FF UICC) Cards are increasing. The “SF56 Series” is a push-push type connector compatible with the micro SIM card. *SIM: Subscriber Identity Module Features 1.25mm height, 14.4mm width, and 16.0mm depth, industry’s lowest-in-class height and smallest-in-class dimensions as a push-push type. Designed for easy operation with a card ejection stroke of 4.1mm. Card detection switch (normal closed) for preventing incomplete insertion. Design allows for visual check / repair of the terminals after the SMT mounting process. Balanced four hold-down points for good EMI performance. Pb-free, halogen-free compliant product. Supports automated mounting with embossed tape. General Specifications ■ No. of Contacts: 6 positions ■Rated Current: 0.5A / terminal ■ Contact Resistance: 100m Ω max. (initial) ■Rated Voltage: 10V / terminal ■ Dielectric Withstanding Voltage: AC 500Vr.m.s. for 1 minute ■Durability: 5,000 times ■ Operating Temperature: -25 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 1/5 MB-0256-2 Materials and Finishes Component Material Finish Signal Contact Detection-SW Contact Copper Alloy Au plating over Ni (contact area) Au flash plating over Ni (terminal area) Housing Synthetic Resin Cover Frame Stainless Steel Eject Bar Synthetic Resin Spring Stainless Steel Cam Follower Stainless Steel Au flash plating over Ni (terminal area only) Ordering Information SF56 S 006 V 4 B (R2000) Series Reeled Part Number (Note) Modification Code Connector Type S: Non-ZIF structure Plating Specification 4. Au / Au flash plating No. of Contacts Connection Type V: SMT mounting with hold-downs Note) An embossed tape reel contains 2,000 pcs. Please contact us for details on the embossed tape specifications. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 2/5 MB-0256-2 Part Number SJ Drawing SF56S006V4B SJ114885 HD3 DSW2 DSW1 ⑤ ④ LOT 14.4 HD2 ③ ① ※※※※※ ⑥ 16.0 HD1 C7 C6 C5 C3 C2 C1 ⑧ ⑦ ② HD4 Unit: mm Note 1: Above drawing is for reference only. Please refer to the most updated drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 3/5 MB-0256-2 14.8 11.145 9.395 9.2 8.9 7.9 4.6 1.6 15.99 16.2 10.59 12.49 DS W2 0.65 1.3 HD 3 0.45 2.80 4.25 5.59 0.4 HD2,DSW 1 NOTE3 NOT E4 HD 1 1.4 C 7 C 6 C 5 C 3 C 2 C 1 HD 4 1.1 1.2 4.07 4.62 1.0 11.12 11.67 Unit: mm Applicable PWB Dimension 適 合 基 板 寸 法 Note 1: Above drawing is for reference only. Please refer to the most updated drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 4/5 MB-0256-2 Technical Documents Part Number SF56S006V4B Product Drawings Individual Product: SJ114885 Embossed Reel Product: SJ114886 Specification JACS-10928 Handling Instruction JAHL-10928 Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 5/5