1.6x0.8mm SMD CHIP LED LAMP ATTENTION APHK1608VGC GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features 1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. The Green source color devices are made with InGaN LOW POWER CONSUMPTION. on SiC Light Emitting Diode. WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. IDEAL FOR BACK LIGHT AND INDICATOR. It is recommended to use a wrist band or VARIOUS COLORS AND LENS TYPES AVAILABLE. anti-electrostatic glove when handling the LEDs. PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1118 REV NO: V.3 DATE: MAR/30/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:: Y.W.WANG ERP:1204000053 Selection Guide Part No. Dice APHK1608VGC Iv (mcd) @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 70 180 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 38 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF Forward Voltage Green 3.5 4.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Green Units 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1118 REV NO: V.3 DATE: MAR/30/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:: Y.W.WANG ERP:1204000053 Green APHK1608VGC SPEC NO: DSAD1118 REV NO: V.3 DATE: MAR/30/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:: Y.W.WANG ERP:1204000053 APHK1608VGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1118 REV NO: V.3 DATE: MAR/30/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:: Y.W.WANG ERP:1204000053 WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com