SDZ5V6AWA Low Cap. ESD Protection Zener Diode ESD Protection Zener Diode General Description SDZ5V6AWA in small SOT-23 SMD plastic package designed to protect one data line from the damage caused by Electro Static Discharge (ESD) and other transients. Features and Benefits ESD protection of one data line Transient protection for data lines to IEC 61000-4-2 (ESD) Air discharge mode: ±15kV, Contact discharge mode: ±8kV Small package for use in portable equipment Full lead(Pb)-free device and RoHS compliant Available in “Green” device SOT-23 Applications ESD protection Ordering Information Part Number Marking Code Package Packaging SDZ5V6AWA Z3E □ SOT-23 Tape & Reel Marking Information Z3E □ Z3E = Specific Device Code □ = Year & Week Code Marking Pinning Information Pin Description 1 Cathode (Diode 1) 2 Cathode (Diode 2) 3 Common Anode Rev. date: 29-NOV-10 Simplified Outline KSD-D5C010-003 Graphic Symbol www.auk.co.kr 1 of 5 SDZ5V6AWA Absolute Maximum Ratings (Tamb=25℃, Unless otherwise specified) Characteristic Symbol Ratings Unit Peak Pulse Power (tp = 8/20㎲) PPK 100 W Power dissipation 1) PD 200 mW Junction temperature TJ 150 C Storage temperature range Tstg -55 ~ 150 C Symbol Ratings Unit Rth(j-a) 625 C/W 1) Device mounted on FR-4 board with recommended pad layout. Thermal Characteristics (Tamb=25℃, Unless otherwise specified) Characteristic Thermal resistance, junction to ambient 1) 1) Device mounted on FR-4 board with recommended pad layout. Electrical Characteristics (Tamb=25℃, Unless otherwise specified) Characteristic Symbol Test Condition Min. Typ. Max. Unit Zener voltage VZ IZ=5mA 5.31 - 5.92 V Dynamic impedance ZZT IZ=5mA - - 60 KNEE dynamic impedance ZZK IZ=0.5mA - - 200 Reverse current IR VR=2.5V - - 1 uA Total capacitance CT VR=0V, f=1MHz - 30 - pF Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 2 of 5 SDZ5V6AWA Rating and Characteristic Curves Fig. 1) Typical Zener Characteristics Rev. date: 29-NOV-10 Fig. 2) Power Dissipation vs. Ambient Temperature KSD-D5C010-003 www.auk.co.kr 3 of 5 SDZ5V6AWA Package Outline Dimensions ※ Recommend PCB solder land (Unit : mm) Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 4 of 5 SDZ5V6AWA The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 5 of 5