STA3250F PNP Silicon Transistor Applications PIN Connection • Power amplifier application • High current switching application Features • Low saturation voltage: VCE(sat)=-0.15V Typ @ IC=-1A, IB=-50mA • Large collector current capacity: IC=-2A • Small and compact SMD type package • Complementary pair with STC4250F SOT-89 Ordering Information Type NO. Marking Package Code STA3250F HW1 YWW SOT-89 HW1: DEVICE CODE, YWW(Y : Year code, WW : Weekly code) Absolute Maximum Ratings [Ta=25℃] Characteristic Symbol Rating Unit Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V IC -2 A PC 0.5 W PC* 1 W TJ 150 °C Tstg -55~150 °C Collector current Collector Power dissipation Junction temperature Storage temperature range Characteristic Thermal resistance Junction-ambient Symbol Typ. Max Rth(J-A) - 250.0 Rth(J-A) * - 125.0 Unit ℃/W * : When mounted on ceramic substrate(250 ㎟×0.8t) KSD-T5B005-004 1 STA3250F Electrical Characteristics [Ta=25℃] Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -0.1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 μA hFE VCE=-2V, IC=-0.5A* 120 - 240 hFE VCE=-2V, IC=-1.5A* 40 - - Collector-emitter saturation voltage VCE(sat) IC=-1A, IB=-0.05A* - - -0.35 V Base-emitter saturation voltage VBE(sat) IC=-1A, IB=-0.05A* - - -1.2 V fT VCE=-2V, IC=-0.05A - 215 - MHz VCB=-10V, IE=0, f=1MHz - 24 - pF DC current gain Transition frequency Collector output capacitance Switching Time Cob Turn-on Time ton - 100 - Storage Time tstg - 300 - - 50 - Fall Time tf < nS *: Pulse test : tP≤300µs, Duty cycle≤2% KSD-T5B005-004 2 STA3250F Electrical Characteristic Curves Fig. 2 IC - VBE ㎽ Fig. 1 PC - Ta Fig. 3 IC - VCE Fig. 5 VCE(sat) - IC Fig. 4 hFE - IC Fig. 6 VBE(sat) - IC KSD-T5B005-004 3 STA3250F Electrical Characteristic Curves Fig. 7 COb - VCB Fig. 8 Safe Operating Area KSD-T5B005-004 4 STA3250F Outline Dimension(mm) ※Recommend PCB solder land [Unit: mm] KSD-T5B005-004 5 STA3250F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B005-004 6