STD13003L NPN Silicon Power Transistor SWITCHING REGULATOR APPLICATIONS Features • High speed switching • VCEO(sus)=400V • Suitable for Switching Regulator and Motor Control PIN Connection C B Ordering Information Type NO. Marking Package Code STD13003L STD13003 TO-92L E ECB Absolute Maximum Ratings Characteristic (Ta=25°C) Symbol Rating Unit Collector-base voltage VCBO 700 V Collector-emitter voltage VCEO 400 V Emitter-base voltage VEBO 9 V Collector current (DC) IC 1.5 A Collector current (Pulse) ICP 3 A Base current (DC) IB 0.75 A Total power dissipation PC 1.5 W Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Characteristic Thermal resistance Junction-ambient Symbol Typ. Max Unit Rth(J-a) - 83.3 ℃/W KSD-T0D001-003 1 STD13003L Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter sustaining voltage VCEO(sus) Test Condition IC=5mA, IB=0 Min. Typ. Max. Unit 400 - - V Collector cut-off current ICBO VCB=700V, IE=0 - - 10 ㎂ Emitter cut-off current IEBO VEB=9V, IC=0 - - 10 ㎂ DC Current gain hFE* 15 - 35 IC=1A, VCE=2V 5 - - IC=0.5A, IB=0.1A - - 0.5 IC=1A, IB=0.25A - - 1 IC=1.5A, IB=0.5A - - 3 IC=0.5A, IB=0.1A - - 1 IC=1A, IB=0.25A - - 1.2 VCB=10V, IC=0.1A, f=1MHz - 4 - MHz VCB=10V, IE=0, f=0.1MHz - 21 - pF - 1.1 - - 4 - - 0.7 - Collector-Emitter saturation voltage Base-Emitter saturation voltage VCE(sat)* VBE(sat)* Transition frequency fT Output capacitance Cob Turn on Time ton Storage Time tstg Fall Time IC=0.5A, VCE=2V VCC=125V,IC=1A IB1=-IB2=0.2A tf V V ㎲ * Pulse test: tP≤300 ㎲, Duty cycle≤2% KSD-T0D001-003 2 STD13003L Electrical Characteristic Curves Fig. 1 Pc - Ta Fig. 2 IC - VCE Fig. 3 VCE(sat) - IC Fig. 4 VBE(sat) - IC Fig. 5 hFE - IC Fig. 6 Safe operating area KSD-T0D001-003 3 STD13003L Electrical Characteristic Curves Fig. 8 Turn off time - IC ㎲ Fig. 7 Turn on time - IC KSD-T0D001-003 4 STD13003L Outline Dimension(mm) KSD-T0D001-003 5 STD13003L The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0D001-003 6