STD13003D NPN Silicon Power Transistor Applications PIN Connection • Power amplifier application • High current switching application Features • High speed switching • VCEO(sus)=400V • Suitable for Switching Regulator and Motor Control TO-252 Ordering Information Type NO. Marking Package Code STD13003D STD13003 TO-252 Absolute Maximum Ratings Characteristic (Ta=25℃) Symbol Ratings Unit Collector-base voltage VCBO 700 V Collector-emitter voltage VCEO 400 V Emitter-base voltage VEBO 9 V IC 1.5 A(DC) ICP* 3 A(Pulse) IB 0.75 A(DC) PC(J-A) 1.2 W PC(J-C) 15 W Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Collector current Base current Collector power dissipation * : Single pulse, tp= 300 ㎲ Characteristic Thermal resistance Symbol Typ. Max Unit Junction-Ambient Rth(J-A) - 104.1 ℃/W Junction-Case Rth(J-C) - 8.3 ℃/W KSD-T6O006-002 1 STC13003D Electrical Characteristics Characteristic Collector-emitter sustaining voltage (Ta=25℃) Symbol VCE(sus) Test Condition IC=5mA, IB=0 Min. Typ. Max. Unit 400 - - V Collector cut-off current ICBO VCB=700V, IE=0 - - 10 uA Emitter cut-off current IEBO VEB=9V, IC=0 - - 10 uA 15 - 35 DC current gain hFE* IC=1A, VCE=2V 5 - - IC=0.5A, IB=0.1A - - 0.5 IC=1A, IB=0.25A - - 1 IC=1.5A, IB=0.5A - - 3 IC=0.5A, IB=0.1A - - 1 IC=1A, IB=0.25A - - 1.2 VCB=10V, IC=0.1A, f=1MHz - 4 - MHz VCB=10V, IE=0, f=0.1MHz - 13 - pF - 1.1 - - 4 - - 0.7 - Collector-emitter saturation voltage Base-emitter saturation voltage VCE(sat)* VBE(sat)* Transition frequency Output capacitance fT Cob Turn on Time ton Storage Time tstg IC=0.5A, VCE=2V V V ㎲ < Fall Time tf * Pulse test: PW≤300 ㎲, Duty cycle≤2% Pulse KSD-T6O006-002 2 STD13003D Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VCE Fig. 3 VCE(sat) - IC Fig. 4 VBE(sat) - IC Fig. 6 Safe operating area Fig. 5 hFE - IC KSD-T6O006-002 3 STD13003D Electrical Characteristic Curves Fig. 7 Turn on time Fig. 8 Turn off time KSD-T6O006-002 4 STD13003D Outline Dimension ※Recommend PCB solder land [Unit: mm] 2.50 7.00 7.00 1.50 4.60 KSD-T6O006-002 5 STD13003D The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T6O006-002 6