STB205L PNP Silicon Transistor PIN Connection Descriptions • Suitable for low voltage large current drivers • Excellent hFE Linearity. • Switching Application Features • High hFE : hFE=200~400 • Low collector saturation voltage. : VCE(sat)=-0.5V(MAX.) TO -92L 1: Emitter 2 :Collector 3: Base Ordering Information Type NO. Marking Package Code STB205L STB 205 YWW TO-92L STB205: DEVICE CODE, YWW(Y : Year code, WW : Weekly code) Absolute Maximum Ratings Characteristic (Ta=25°C) Symbol Rating Unit Collector-base voltage VCBO -35 V Collector-emitter voltage VCEO -20 V Emitter-base voltage VEBO -5 V IC -5 A(DC) ICP* -10 A(Pulse) Collector power dissipation PC 1 W Junction temperature TJ 150 °C Tstg -55~150 °C Collector current Storage temperature range * : Single pulse, tp= 300 ㎲ Characteristic Thermal resistance Symbol Typ. Max Unit Rth(J-a) - 125.0 ℃/W KSD-T0D010-001 1 STB205L Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-50μA, IE=0 -35 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -20 - - V Emitter-Base breakdown voltage BVEBO IE=-50μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-35V, IE=0 - - -1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -1 μA 200 - 400 - 40 - - - DC current gain *hFE 1) hFE VCE=-2V, IC=-0.5A VCE=-2V, IC=-3A Collector-emitter saturation voltage *VCE(sat)2) IC=-3A, IB=-0.15A - - -0.5 V Base-emitter saturation voltage *VBE(sat) 2) VC=-3A, IB=-0.15A - - -1.2 V fT VCB=-5V, IC=-50mA - 180 - MHz VCB=-10V, IE=0, f=1MHz - 42 - pF Transition frequency Collector output capacitance Cob * Note 1) hFE Rank : 200~400 only * Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0% KSD-T0D010-001 2 STB205L Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 hFE - IC Fig. 4 VCE(sat) - IC Fig. 5 COb - VCB Fig. 6 Safe Operating Area KSD-T0D010-001 3 STB205L Outline Dimension . KSD-T0D010-001 4 STB205L The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0D010-001 5