STC2073F NPN Silicon Transistor Descriptions PIN Connection • General purpose amplifier • High voltage application 4 Features • High collector breakdown voltage : VCEO = 160V • Low collector saturation voltage : VCE(sat)=0.5V(MAX.) • “Green” device and RoHS compliant device • Available in full lead (Pb)-free device 1 2 3 SOT-89 Ordering Information Type No. Marking Package Code STC2073F N73 YWW SOT-89 N73: DEVICE CODE, YWW(Y : Year code, WW : Weekly code) Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 160 V Collector-Emitter voltage VCEO 160 V Emitter-Base voltage VEBO 7 V IC 1 A(DC) ICP* 2 A(Pulse) PC 0.5 PC** 1 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current Collector power dissipation W * : Single pulse, tp= 300 ㎲ ** : When mounted on ceramic substrate(250 ㎟×0.8t) KSD-T5B016-003 1 STC2073F Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 160 - - Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 160 - - Emitter-Base breakdown voltage BVEBO IE=100μA, IC=0 7 - - Collector cut-off current ICBO VCB=160V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.1 ㎂ 200 - 400 - DC current gain Collector-Emitter saturation voltage Base-Emitter saturation voltage Transition frequency Collector output capacitance hFE 1) VCE=5V, IC= 30 ㎃ V V V VCE(sat)2) IC=500 ㎃, IB=50 ㎃ - - 0.5 V VCE(sat)2) IC=200 ㎃, IB=2 ㎃ - - 1.0 V VBE(sat) 2) IC=500 ㎃, IB=50 ㎃ - - 1.2 V VCE=5V, IC= 50 ㎃ - 150 - ㎒ VCB=10V, IE=0, f=1 ㎒ - 10 - ㎊ fT Cob * Note 1) hFE Rank : 200~400 only * Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0% KSD-T5B016-003 2 STC2073F Electrical Characteristic Curves Fig. 1 PC - Ta ㎽ Fig. 2 IC - VBE Fig. 3 VCE(sat) - IC Fig. 4 IC - VCE Fig. 5 IC - VCE Fig. 6 hFE-IC KSD-T5B016-003 3 STC2073F Electrical Characteristic Curves Fig. 7 hFE-IC Fig. 8 hFE-IC Fig. 10 Cob - VCB Fig. 9 hFE-IC ℃ Fig. 12 Safe operating Area Fig. 11 fT - IC * * * a × KSD-T5B016-003 × 4 STC2073F Outline Dimension(mm) ※Recommend PCB solder land [Unit: mm] KSD-T5B016-003 5 STC2073F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B016-003 6