KODENSHI STC4073F

STC4073F
NPN Silicon Transistor
Descriptions
PIN Connection
• General purpose amplifier
• High voltage application
Features
• High collector breakdown voltage
: VCEO = 120V
• Low collector saturation voltage
: VCE(sat)=0.5V(MAX.)
• “Green” device and RoHS compliant device
SOT-89
• Available in full lead (Pb)-free device
Ordering Information
Type No.
Marking
STC4073F
M73
□YWW
M73: DEVICE CODE,
Package Code
SOT-89
□ : hFE rank, YWW(Y
: Year code, WW : Weekly code)
Absolute maximum ratings
(Ta=25°C)
Characteristic
Symbol
Ratings
Unit
Collector-Base voltage
VCBO
120
V
Collector-Emitter voltage
VCEO
120
V
Emitter-Base voltage
VEBO
6
V
IC
1
A(DC)
ICP*
2
A(Pulse)
PC
0.5
PC**
1
Junction temperature
TJ
150
°C
Storage temperature
Tstg
-55~150
°C
Collector current
Collector power dissipation
Characteristic
Thermal resistance
Junction-ambient
W
Symbol
Typ.
Max
Rth(J-A)
-
250.0
Rth(J-A) **
-
125.0
Unit
℃/W
* : Single pulse, tp= 300 ㎲
** : When mounted on ceramic substrate(250 ㎟×0.8t)
KSD-T5B017-004
1
STC4073F
Electrical Characteristics
(Ta=25°C)
Characteristic
Symbol
Test Condition
Collector-Base breakdown voltage
BVCBO
IC=100μA, IE=0
120
-
-
V
Collector-Emitter breakdown voltage
BVCEO
IC=1mA, IB=0
120
-
-
V
Emitter-Base breakdown voltage
BVEBO
IE=100μA, IC=0
6
-
-
V
Collector cut-off current
ICBO
VCB=120V, IE=0
-
-
0.1
㎂
Emitter cut-off current
IEBO
VEB=4V, IC=0
-
-
0.1
㎂
DC current gain
hFE 1)
VCE=5V, IC= 30 ㎃
200
-
400
-
-
-
0.5
V
0.1
V
0.15
V
0.3
V
IC=500 ㎃, IB=50 ㎃
Collector-Emitter saturation voltage
2)
IC=100 ㎃, IB=10 ㎃
VCE(sat)
IC=120 ㎃, IB=2 ㎃
IC=200 ㎃, IB=2 ㎃
Min. Typ. Max.
-
-
-
-
Unit
Base-Emitter turn on voltage
VBE(on) 2)
VCE=0.2V, IC= 200 ㎃
0.6
-
0.85
V
Base-Emitter saturation voltage
VBE(sat) 2)
IC=500 ㎃, IB=50 ㎃
-
-
1.2
V
Transition frequency
fT
VCE=5V, IC= 50 ㎃
-
170
-
㎒
Collector output capacitance
Cob
VCB=10V, IE=0, f=1 ㎒
-
10
-
㎊
* Note 1) hFE Rank : 200~400 only
* Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0%
KSD-T5B017-004
2
STC4073F
Electrical Characteristic Curves
Fig. 2 IC - VBE
Fig. 3 VCE(sat) - IC
Fig. 4 IC - VCE
Fig. 5 IC - VCE
Fig. 6 hFE-IC
㎽
Fig. 1 PC - Ta
KSD-T5B017-004
3
STC4073F
Electrical Characteristic Curves
Fig. 7 hFE-IC
Fig. 8 hFE-IC
Fig. 10 Cob - VCB
Fig. 9 hFE-IC
℃
Fig. 11 fT - IC
Fig. 12 Safe operating Area
*
*
*
a
×
KSD-T5B017-004
×
4
STC4073F
Outline Dimension(mm)
※Recommend PCB solder land [Unit: mm]
KSD-T5B017-004
5
STC4073F
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-T5B017-004
6