STD13005 NPN Silicon Power Transistor SWITCHING REGULATOR APPLICATIONS PIN Connection Features • High speed switching • VCEO(sus)=400V • Suitable for Switching Regulator and Motor Control C B Ordering Information Type NO. Marking Package Code STD13005 STD13005 TO-220AB BCE E Absolute maximum ratings Characteristic (Tc=25℃) Symbol Ratings Unit Collector-Base voltage VCBO 700 V Collector-Emitter voltage VCEO 400 V Emitter-base voltage VEBO 9 V Collector current (DC) IC 4 A Collector current (Pulse) ICM 8 A Base current (DC) IB 2 A Base current (Pulse) IBM 4 A Total Power dissipation (Tc=25℃) PD 60 W Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Characteristic Thermal resistance Symbol Typ. Max Junction-case Rth(J-C) - 2.08 Junction-ambient Rth(J-a) - 83.3 KSD-T0P016-001 Unit ℃/W 1 STD13005 Electrical Characteristics (Tc=25℃) Characteristic Symbol Collector-Emitter sustaining voltage VCE(sus) Test Condition IC=10mA, IB=0 Min. Typ. Max. Unit 400 - - V Collector cut-off current ICEV VCEV=Rated Value VBE(off)=1.5V - - 1 mA Emitter cut-off current IEBO VEB=9V, IC=0 - - 1 mA 15 - 40 IC=2A, VCE=5V 8 - 40 IC=1A, IB=0.2A - - 0.5 IC=2A, IB=0.5A - - 0.6 IC=4A, IB=1A - - 1 IC=1A, IB=0.2A - - 1.2 IC=2A, IB=0.5A - - 1.6 VCB=10V, IC=0.5A, f=1MHz - 4 - MHz VCB=10V, IE=0, f=0.1MHz - 65 - pF - 0.8 - - 4 - - 0.9 - DC Current gain Collector-Emitter saturation voltage Base-Emitter saturation voltage hFE* VCE(sat)* VBE(sat)* Transition frequency fT Output capacitance Cob Turn on Time tON Storage Time Fall Time tSTG IC=1A, VCE=5V※ VCC=125V,IC=2A, RL=62.5Ω IB1=-IB2=0.4A tF V V ㎲ * Pulse test: PW≤300 ㎲, Duty cycle≤2% Pulse ※ hFE rank / A : 15~28, B : 26~40 KSD-T0P016-001 2 STD13005 Electrical Characteristic Curves Fig. 1 PD - TC Fig. 2 VBE(sat) , VCE(sat) - IC Fig. 3 hFE-IC Fig. 4 Turn off time Fig. 5 Turn on time Fig. 6 Capacitance KSD-T0P016-001 3 STD13005 Electrical Characteristic Curves Fig. 7 Forward Safe Operating Area Fig. 8 Reverse Safe Operating Area ≤ KSD-T0P016-001 4 STD13005 Outline Dimension KSD-T0P016-001 5 STD13005 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0P016-001 6