STD5915 NPN Silicon Power Transistor Features PIN Connection • High Voltage, high speed switching • VCEO(sus)=530V • Suitable for Switching Regulator and Motor Control, Electronic Ballast C B C E B E TO-92 Ordering Information Type NO. Marking Package Code STD5915 STD5915 TO-92 Absolute Maximum Ratings Characteristic (Ta=25℃) Symbol Ratings Unit Collector-base voltage VCBO 900 V Collector-emitter voltage VCEO 530 V Emitter-base voltage VEBO 9 V Collector current (DC) IC 1.5 A Collector current (Pulse) ICP 3 A Base current (DC) IB 0.75 A Collector power dissipation PC 1.1 W Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C KSD-T0A011-003 1 STD5915 Electrical Characteristics (Ta=25℃) Characteristic Symbol Collector-emitter sustaining voltage VCE(sus)* IC=10mA, IB=0 530 - - V Collector cut-off current ICBO VCB=900V, IE=0 - - 10 uA Emitter cut-off current IEBO VEB=9V, IC=0 - - 10 uA DC current gain hFE* 20 - 40 IC=1A, VCE=10V 6 - 40 IC=0.5A, IB=0.1A - - 0.8 IC=1A, IB=0.25A - - 1 IC=1.5A, IB=0.5A - - 2.5 IC=0.5A, IB=0.1A - - 1 IC=1A, IB=0.25A - - 1.2 VCB=10V, IC=0.1A, f=1MHz 4 - - MHz VCB=10V, IE=0, f=0.1MHz - 11 - pF Collector-emitter saturation voltage Base-emitter saturation voltage VCE(sat)* VBE(sat)* Test Condition IC=0.4A, VCE=10V Min. Typ. Max. Transition frequency fT Output capacitance Cob Turn on Time ton - - 1.1 Storage Time tstg - - 4 - - 0.7 Fall Time tf < Unit V V ㎲ * Pulse test: PW≤300 ㎲, Duty cycle≤2% Pulse KSD-T0A011-003 2 STD5915 Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VCE Fig. 3 VCE(sat) - IC Fig. 4 VBE(sat) - IC Fig. 5 hFE-IC Fig. 6 Safe Operating Area KSD-T0A011-003 3 STD5915 Electrical Characteristic Curves Fig. 7 Turn on time Fig. 8 Turn off time KSD-T0A011-003 4 STD5915 Outline Dimension KSD-T0A011-003 5 STD5915 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A011-003 6