STS9014 NPN Silicon Transistor Description PIN Connection • General purpose application C • Switching application Features B C B E • Excellent hFE linearity : hFE(IC=0.1 mA) / hFE(IC=2 mA) = 0.95(Typ.) • Low noise : NF=10dB(Max.) at f=1KHz • Complementary pair with STS9015 E TO-92 Ordering Information Type NO. STS9014 Marking Package Code STS9014 TO-92 Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 60 V Collector-Emitter voltage VCEO 50 V Emitter-Base voltage VEBO 5 V Collector current IC 150 mA Emitter current IE -150 mA Collector dissipation PC 625 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector cut-off current ICBO VCB=50V, IE=0 - - 50 nA Emitter cut-off current IEBO VEB=5V, IC=0 - - 100 nA 100 - 1000 - - 0.1 0.25 V 60 - - MHz DC current gain Collector-Emitter saturation voltage Transistion frequency Collector output capacitance Noise figure * hFE VCE(sat) fT VCE=5V, IC=1mA IC=100mA, IB=10mA VCE=10V, IC=1mA Cob VCB=10V, IE=0, f=1MHz - 2 3.5 pF NF VCB=6V, IC=0.1mA, f=1KHz, Rg=10KΩ - - 10 dB * : hFE rank / B : 100 ~ 300, C : 200 ~ 600, D : 400 ~ 1000. KSD-T0A048-000 1 STS9014 Electrical Characteristic Curves Fig. 2 IC -VBE Fig. 1 PC –Ta 5 Fig. 3 IC -VCE Fig. 4 hFE -IC Fig. 5 VCE(sat) -IC KSD-T0A048-000 2 STS9014 Outline Dimension KSD-T0A048-000 3 STS9014 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A048-000 4