STA9012N Semiconductor PNP Silicon Transistor Description • General purpose application • Switching application Features • Excellent hFE linearity • Complementary pair with STC9013N Ordering Information Type NO. Marking Package Code STA9012N STA9012 TO-92N 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 1 2 3 0.40 Max. 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C021-001 1 STA9012N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO -40 V Collector-emitter voltage VCEO -30 V Emitter-base voltage VEBO -5 V Collector current IC -500 mA Collector power dissipation PC 500 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -30 - - V Collector cut-off current ICBO VCB=-40V, IE=0 - - -0.1 µA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 µA DC current gain hFE* VCE=-1V, IC=-50mA 96 - 246 - IC=-100mA, IB=-10mA - -0.1 -0.25 V VCE=-1V, IC=-100mA - -0.75 -1.0 V VCE=-6V, IC=-20mA - 200 - MHz VCB=-6V, IE=0, f=1MHz - 7 - pF Collector-emitter saturation voltage VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance * Cob Test Condition Min. Typ. Max. Unit : hFE rank / F : 96~135, G : 118~166, H : 144~202, I : 176~246. KSD-T0C021-001 2 STA9012N Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 I C - VCE Fig. 4 VCE(sat) - IC Fig. 5 hFE - IC Fig. 6 hFE - IC KSD-T0C021-001 3 STA9012N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0C021-001 4