LITEON LTP

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
LED DISPLAY
LTP-2558CA
DATA SHEET
Rev
Description
By
-
NPPR Original Spec
Jenny Ni
08/22/2000
A
Revise package dimensions on page 2/5
Change from: Width 37.9 mm, Length 60.8mm
Change to: Width 32.0 mm, Length 50.9 mm
Phanomkorn J.
01/28/2008
SPEC. NO.:
DATE
:
REV. NO. :
PART NO.: LTP-2558CA
BNS-OD-C131/A4
DS-30-98-429
01/28/2008
A
PAGE:
0
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
FEATURES
*1.95 inch (49.45 mm) MATRIX HEIGHT.
*LOW POWER REQUIREMENT.
*SINGLE PLANE, WIDE VIEWING ANGLE.
*SOLID STATE RELIABILITY.
*5×8 ARRAY WITH X-Y SELECT.
*COMPATIBLE WITH USASCII AND EBCDIC CODES.
*STACKABLE HORIZONTALLY.
*CATEGORIZED FOR LUMINOUS INTENSITY.
*LEAD-FREE PACKAGE(ACCORDING TO ROHS)
DESCRIPTION
The LTP-2558CA is a 1.95 inch ( 49.45 mm) matrix height 5×8 dot matrix displays
This device utilizes Red Orange and Green LED chips The Red Orange LED chips are
made from GaAsP on GaP a transparent substrate, the green LED chips are made from
GaP on GaP substrate , and has a gray face and white dot color.
DEVICE
PART NO.
DESCRIPTION
Red Orange and Green
CATHODE COLUMN
ANODE ROW
LTP-2558CA
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
1
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PACKAGE DIMENSIONS
NOTES: 1. All dimensions are in millimeters. Tolerances are ± 0.25 mm unless otherwise note.
2. Pin tip’s shift tolerance is ± 0.4 mm.
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
2
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PIN CONNECTION
No.
CONNECTION
No.
CONNECTION
1
CATHODE COLUMN 1 GREEN
2
CATHODE COLUMN 1 RED ORANGE
3
CATHODE COLUMN 2 GREEN
4
CATHODE COLUMN 2 RED ORANGE
5
ANODE ROW 8
6
CATHODE COLUMN 2 GREEN
7
CATHODE COLUMN 3 RED ORANGE
8
ANODE ROW 7
9
ANODE Row 6
10
ANODE ROW 5
11
CATHODE COLUMN 5 GREEN
12
CATHODE COLUMN 5 RED ORANGE
13
CATHODE COLUMN 4 GREEN
14
CATHODE COLUMN 4 RED ORANGE
15
ANODE Row 1
16
CATHODE COLUMN 3 GREEN
17
CATHODE COLUMN 3 RED ORANGE
18
ANODE Row 2
19
ANODE Row 3
20
ANODE Row 4
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
3
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER
GREEN
UNIT
Average Power Dissipation Per Dot
36
mW
Peak Forward Current Per Dot
100
mA
Average Forward Current Per Dot
Derating Linear From 25℃ Per Dot
13
mA
mA/℃
0.17
Reverse Voltage Per Dot
Operating Temperature Range
5
-35℃ to +85℃
Storage Temperature Range
-35℃ to +85℃
V
Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C
or of temperature unit (during assembly) not over max. temperature rating above.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
GREEN
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
Ip=80mA
Average Luminous Intensity
IV
1780 4800
µcd
Peak Emission Wavelength
λp
565
nm
IF=20mA
Spectral Line Half-Width
∆λ
30
nm
IF=20mA
Dominant Wavelength
λd
569
nm
IF=20mA
Forward Voltage any Dot
VF
Reverse Current any Dot
IR
100
IV-m
2:1
Luminous Intensity Matching Ratio
(Similar Light Area)
2.1
2.6
3.0
3.7
1/16Duty
IF=20mA
V
IF=80mA
µA
VR=5V
IF=10mA
Note: Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
4
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER
RED ORANGE
UNIT
Average Power Dissipation Per Dot
36
mW
Peak Forward Current Per Dot
100
mA
Average Forward Current Per Dot
Derating Linear From 25℃ Per Dot
13
mA
mA/℃
0.17
Reverse Voltage Per Dot
Operating Temperature Range
5
-35℃ to +85℃
Storage Temperature Range
-35℃ to +85℃
V
Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C
or of temperature unit (during assembly) not over max. temperature rating above.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
RED ORANGE
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
Ip=80mA
Average Luminous Intensity
IV
1780 4800
µcd
Peak Emission Wavelength
λp
630
nm
IF=20mA
Spectral Line Half-Width
∆λ
40
nm
IF=20mA
Dominant Wavelength
λd
621
nm
IF=20mA
Forward Voltage any Dot
VF
Reverse Current any Dot
IR
100
IV-m
2:1
Luminous Intensity Matching Ratio
(Similar Light Area)
2.0
2.6
2.6
3.4
1/16Duty
IF=20mA
V
IF=80mA
µA
VR=5V
IF=10mA
Note: Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
5
of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
(25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTP-2558CA
BNS-OD-C131/A4
PAGE:
6
of 6