COTCO LUMINANT DEVICE (HUIZHOU) LTD. SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LO566PYO2-65H-A-MT LO566PYO2-65H-A-MT 01 2006-12-06 Description: 65 Degree 5mm Oval LED Lamp in Yellow Orange Color with White Diffused Lens and No Stopper *This specification is only for MT Dice Material: AlGaInP Confirmed by Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] Document No. SPE/LO566PYO2-65H-A-MT Rev. No. 01 Applications: - Dimension Drawing Variable Message Signs Message Board Absolute Maximum Ratings at Ta = 25°C Items Absolute maximum Symbol Unit Rating Forward Current*2 IF 50 mA Peak Forward Current*1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 125 mW Operation Temperature Topr -40 ~ + 95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Max.260°C for 3 sec Max. Tsol (3mm from the base of the epoxy bulb) *1 pulse width <=0.1msec duty <=1/10 *2 For long term performance the drive currents between 10mA and 30mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions. Typical Electrical & Optical Characteristics ( Ta = 25°C) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA --- 2.0 2.5 V Reverse Current IR VR = 5V --- --- 100 µA Dominant Wavelength λD IF = 20mA 600 605 609 nm Luminous Intensity IV IF = 20mA 770 1300 --- mcd 2θ½H-H IF = 20mA --- 65 --- deg 2θ½V-V IF = 20mA --- 30 --- deg 50% Power Angle 2/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LO566PYO2-65H-A-MT Rev. No. 01 Standard bins for LO566PYO2-65H-A-MT (IF = 20mA): Lamps are sorted to Luminous Intensity –IV, VF & Dominant Wavelength –λD bins shown. Orders for LO566PYO2-65H-A-MT may be filled with any or all bins contained as below. All Luminous Intensity –IV, VF & Dominant Wavelength –λD values shown and specified are at IF =20mA. * S+ X2 X3 X4 V or above Luminous Intensity (IV) 2130mcd U 1520mcd T 1100mcd S 770mcd 600nm 603nm 606nm 609nm Dominant Wavelength (λD) * S+ indicates Luminous Intensity is at S bin or above. Forward Voltage (VF) Rank V1 V2 V3 V4 V5 Voltage 1.6-1.8V 1.8-2.0V 2.0-2.2V 2.2-2.4V 2.4-2.6V Important Notes: 1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution. 2) Pb content <1000PPM. 3) Tolerance of measurement of luminous intensity is ±15%. 4) Tolerance of measurement of dominant wavelength is ±1nm. 5) Tolerance of measurement of Vf is ±0.05 V. 6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 8) Please refer to APPLICATION NOTES for Application. 3/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LO566PYO2-65H-A-MT Rev. No. 01 Graphs -50 -60 If (mA) 100.0 -40 -30 -20 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=20nm Domi WL= 605nm 5.0 4.0 100% 3.0 75% 2.0 50% 25% 1.0 0.0 0.0 If(mA) 0% 300 20.0 40.0 60.0 80.0 100.0 400 500 600 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. H-H : 65 V-V : 30 50% Power Angle : IF(mA) 100 H-H 80 WL(nm) 800 V-V Ie(%) 0 100% Rθj-pin=220 C/W 80% 60 60% 40 40% 20 Rθj-a=450 C/W 20% T ( C) 0 0.0 20.0 40.0 60.0 80.0 100.0 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) -90 -60 -30 0 30 60 90 0% FIG.6 FAR FIELD PATTERN 1. Cathode PAD Area (0.18 x 0.18inch2) 2. Height above nominal seating plane in inches(0.3inch) Items Signatures Date Prepared by LiuZM 2006-12-06 Checked by MaJF 2006-12-06 Approved by David 2006-12-06 FCN# Revision History Rev. No Date Change Description FCN20060 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. 4/4 Format #: COTCO-D-074 REV.4