MARKTECH LC503PBL1-30Q-A-MT

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP
Document No:
Model No :
Rev. No:
Date:
SPE/LC503PBL1-30Q-A-MT
LC503PBL1-30Q-A-MT
03
2006-04-18
Description:
30 Degree 5mm LED Lamp in Blue Color
with Water Transparent Lens and No Stopper
*This specification is only for MT
Dice Material:
InGaN
Confirmed
by Customer:
Date:
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC
SENSITIVE DEVICES
For part availability and ordering information please call Toll Free: 800.984.5337
Website: www.marktechopto.com | Email: [email protected]
Document No. SPE/LC503PBL1-30Q-A-MT
Rev. No.
03
Applications:
-
Dimension Drawing
Advertising Signs
Indicators
LCD Back Light
Moving Message Signs
Absolute Maximum Ratings at Ta = 25°C
Items
Absolute maximum
Symbol
Unit
Rating
Forward Current
IF
25
mA
Peak Forward Current*
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering
Temperature
Max.260°C for 3 sec Max.
Tsol
(3mm from the base of the epoxy bulb)
*pulse width <=0.1msec duty <=1/10
Typical Electrical & Optical Characteristics ( Ta = 25°C)
Items
Symbol
Condition
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF = 20mA
---
3.4
4.0
V
Reverse Current
IR
VR = 5V
---
---
100
µA
Dominant Wavelength
λD
IF = 20mA
465
470
475
nm
Luminous Intensity
IV
IF = 20mA
770
1600
---
mcd
50% Power Angle
2θ½H-H
IF = 20mA
---
30
---
deg
2/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LC503PBL1-30Q-A-MT
Rev. No.
03
Standard bins for LC503PBL1-30Q-A-MT (IF = 20mA):
Lamps are sorted to Luminous Intensity –IV , VF & Dominant Wavelength –λD bins shown.
Orders for LC503PBL1-30Q-A-MT may be filled with any or all bins contained as below.
All Luminous Intensity –IV , VF & Dominant Wavelength –λD values shown and specified are at IF =20mA.
*S+
X4
X5
3000mcd
Luminous Intensity (IV)
V
2130mcd
U
1520mcd
T
1100mcd
S
770mcd
465nm
470nm
475nm
Dominant Wavelength (λD)
* S+ indicates Luminous Intensity is at S bin or above.
Forward Voltage (VF)
Rank
V7
V8
V9
V10
V11
V12
Voltage
2.8-3.0V
3.0-3.2V
3.2-3.4V
3.4-3.6V
3.6-3.8V
3.8-4.0V
*Majority VF bins are highlighted in Yellow.
Important Notes:
1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution.
2) Pb content <1000PPM.
3) Tolerance of measurement of luminous intensity is ±15%.
4) Tolerance of measurement of dominant wavelength is ±1nm.
5) Tolerance of measurement of Vf is ±0.05 V.
6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD.
7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions.
8) Please refer to APPLICATION NOTES for Application.
3/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LC503PBL1-30Q-A-MT
Rev. No.
03
Graphs
1. Cathode PAD Area (0.18 x 0.18inch2)
2. Height above nominal seating plane in inches(0.3inch)
Items
Signatures
Date
Prepared by
LiuZM
2006-04-18
Rev. No
Date
Checked by
Aldosin
2006-04-18
02
11Nov04
Approved by
David
2006-04-18
03
2006-04-18
FCN#
Revision History
Change Description
IV from T,U,V(typ)1600 to S,T,U(typ)1500mcd. Change
Topr and Tstg. Change IV & λD form.
IV from S,T,U(typ)1500 to S,T,U,V(typ)1600mcd; Change
VF from V9~V13(typ)3.6 to V7~V12(typ)3.4V & Graphs.
Highlight V8~V10.
FCN20060
Data is subject to change without prior notice.
Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4