Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3224190751 Item: DIP24-1C90-51F Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Remark Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 90 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive ) * + ,% Start Value ( - #. + %. RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch / 0 ( Conditions Min Typ * * 1 Max Unit 1 Form C - Changeover according to IEC 255-5 RH <45%, 200 VDC test voltage @ 10 kHz 0 / 1 black epoxy resin CuFe2P tin plated no yes NRNT2.E156887 NRNT8.E156887 electrostatic shield pin 9, diode pin 2+6 Modifications in the sense of technical progress are reserved Designed at: 29.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 29.04.04 Last Change by: SCHELLHORN Approval at: 05.11.09 Approval by: Approval by: KOLBRICH Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3224190751 Item: DIP24-1C90-51F Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 4 4 wave soldering max. 5 sec. Max ( 5 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 2 Modifications in the sense of technical progress are reserved Designed at: 29.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 29.04.04 Last Change by: SCHELLHORN Approval at: 05.11.09 Approval by: Approval by: KOLBRICH Version: 01