Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9134902054 Item: MK13-1B90D-500W Magnetic properties Pull in Test equipment Conditions Min Typ at 20 C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14+PK002+SA002 Conditions Min Typ Max Unit B - NC not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ % & !"! & Sensor deactivated PBT glass fibre reinforced white Polyurethan Environmental data Conditions Min Operating temperature Operating temperature Storage temperature cable not moved cable moved '( ' '( Cable specification Conditions Typ Max Unit Min Cable typ Cable material Cross section [mm ] Typ Max Unit Max Unit flat cable PVC,white 2x0,14 Conditions General data Mounting advice Mounting advice Mounting advice tightening torque Min Typ from 5m cable, a pre-resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. ) * ! # +( ,* Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 18.10.06 Designed by: ALICHTENSTEIN Approval at: Last Change at: 18.10.06 Last Change by: ALICHTENSTEIN Approval at: 07.11.07 Approval by: Approval by: BUELTZHOEFFER Version: 01