Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9123521024 Item: MK12-1A52C-200W Magnetic properties Pull in Test equipment Conditions Min at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Typ Max Unit KMS-31 with input and PK002 and SA002 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ % ! % Sensor deactivated Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced white Polyurethan Min Typ ( ( ( Max ' ' ' Min Cable typ Cable material Cross section [mm²] Typ Unit & & & Max Unit Max Unit round cable PVC 0,34 qmm Conditions General data Mounting advice Mounting advice Mounting advice tightening torque * " + ,* Disk ISO 7089 Min Typ from 5m cable, a pre-resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. ) ' Modifications in the sense of technical progress are reserved Designed at: 12.03.09 Designed by: WKOVACS Approval at: 13.03.09 Approval by: TFRITSCHI Last Change at: 27.03.09 Last Change by: WKOVACS Approval at: 11.09.09 Approval by: DSTASTNY Version: 03