Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9231662530 Item: MK23-66-E-2 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact rating Switching voltage (>20 AT) Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Capacity Modified dimensions Unit Max Unit KMS-01 KMS-21 Conditions Contact data 66 Max Min Typ 66 A Rhodium ! " #$ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC " & Start Value ") ("* Start Value # ' ( & &( " % & ) " % +% # RH <45 %, 100 VDC test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ,- Conditions Min Remarks Typ Max Unit to dimensions see drawing Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Conditions Min Typ Max 1/2 Sinuswelle, Dauer 11ms von 10 - 2000 Hz Wellenlöten max. 5 Sek. 0 Unit . . / / / Modifications in the sense of technical progress are reserved Designed at: 18.06.08 Designed by: AKELLER Approval at: 18.06.08 Approval by: RKAMP Last Change at: 09.07.09 Last Change by: AKELLER Approval at: 09.07.09 Approval by: RKAMP Version: 06