Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2118704081 Item: KSK-1B87-BV4081 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Modified dimensions Unit Max Unit KMS-01 KMS-22 Conditions Contact data 87 Max Min Typ 87 B - NC Rhodium Plating thicknesses are proprietary not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC " # Start Value " & % ' Start Value $ % # #% ! # & ! (! RH <45 %, 100V - to all points according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ) * +, Conditions Min Remarks Typ Max Unit to dimensions see drawing Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Conditions Min / / Max ) ) * wave soldering max. 5 sec. Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Typ Max Unit . . . Unit 0 # 1 # ' + permanent by strong magnetic fields. Remark Modifications in the sense of technical progress are reserved Designed at: 28.05.09 Designed by: AKELLER Approval at: 22.07.09 Approval by: RKAMP Last Change at: 26.08.09 Last Change by: AKELLER Approval at: 25.01.10 Approval by: RKAMP Version: 02