Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2116611102 Item: KSK-1A66-BV11102 Magnetic properties Conditions Min Typ Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage ( > 20 AT ) Operate Time Release time Capacity Modified dimensions Unit Max Unit KMS-02 Conditions Contact data 66/3 Max Min Typ 66/3 A Iridium ! " #$ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC " &' Start Value "* & )"+& Start Value # ( ) ' ') " ' * % " % ,% # RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch -. Conditions Min Remarks Typ Max Unit to dimensions see drawing Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit / / 0 0 0 wave soldering max. 5 sec. Modifications in the sense of technical progress are reserved Designed at: 23.06.09 Designed by: AKELLER Approval at: 23.06.09 Approval by: RKAMP Last Change at: 17.07.09 Last Change by: AKELLER Approval at: 17.07.09 Approval by: RKAMP Version: 02