Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9231522025 Item: MK23-52-D-2 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (<36 AT) Operate time incl. bounce Release time Capacity Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Unit Max Unit KMS-01 KMS-21 Conditions Contact data 52 Max Min Typ 52 A Rhodium !" AC RMS 70 VA DC or Peak AC DC or Peak AC DC or Peak AC Start Value ' & ( Start Value % & # ! & $ ' $ )$ !*+ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ,- Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz # # 0 wave soldering max. 5 sec. Unit . . /+ /+ /+ Modifications in the sense of technical progress are reserved Designed at: 01.12.09 Designed by: AKELLER Approval at: 01.12.09 Approval by: RKAMP Last Change at: 07.06.10 Last Change by: AKELLER Approval at: 07.06.10 Approval by: RKAMP Version: 03