Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9231803035 Item: MK23-80-F-2 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact-rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Modified dimensions Unit Max Unit KMS-01 KMS-22 Conditions Contact data 80 Max Min Typ 80 A Rhodium ! " #$ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC " ' Start Value "* )"+ Start Value % ( ) ' ') " ' * # & " & ,& # RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ./ Conditions Min Remarks Typ Max Unit to dimensions see drawing Environmental data Shock Vibration Ambient temperature Storage temperature Soldering Temperature Tsold Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz Reflow according IPC/JEDEC J-STD-0 - Unit 0 0 1 1 1 Modifications in the sense of technical progress are reserved Designed at: 11.12.09 Designed by: AKELLER Approval at: 11.12.09 Approval by: RKAMP Last Change at: 12.11.10 Last Change by: AKELLER Approval at: 12.11.10 Approval by: RKAMP Version: 03