Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8712190200 Item: MRX12-1C90 Conditions Coil Data at 20 °C Coil resistance Inductance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Special Product Data Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Housing material Sealing compound Connection pins Remarks Remarks 1. Remarks 2. Min Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ) * + ,% Start Value ( ( - #. + %. RH <45 %, 200 V test voltage / measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch * * 0 Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz Typ Unit / 1 ( 2 2 3 3 3 4 4 wave sodering max. 5 sec. Max 5 fully sealed Plastics / Polyamid Polyurethan Copper alloy tin plated Reed-Relay to be used for the galvanic separation of intrinsically safe and non-intrinsically safe circuits with Ex-approval by PTB 01 ATEX 2050 U. Modifications in the sense of technical progress are reserved Designed at: 23.08.07 Designed by: WKOVACS Approval at: 05.09.07 Approval by: KOLBRICH Last Change at: 03.07.08 Last Change by: ALICHTENSTEIN Approval at: 09.07.08 Approval by: KOLBRICH Version: 05