Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3305100471 Item: SIL05-1A72-71LHR Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 66/1 Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Capacitance Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning A-NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ % & ' "#" ' Start Value ( ! ' )! " ( Start Value RH <45 %, 200 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch * +, Conditions Min Typ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit * - epoxy resin Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz 0 0 wave sodering max. 5 sec. fully sealed 1 Unit . . / / / Modifications in the sense of technical progress are reserved Designed at: 16.12.08 Designed by: THAUKE Approval at: Last Change at: 08.01.09 Last Change by: THAUKE Approval at: 08.01.09 Approval by: Approval by: JHEYDER Version: 2