Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312185776 Item: SIL12-1A85-76D4K Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact Data 85 Contact rating Switching voltage Switching current Pulsed carry current not to exceed their individual max.'s DC or Peak AC DC or Peak AC 5ms after coil excitation for 50ms max. Carry current Contact resistance static Insulation resistance Breakdown voltage (>55 AT) Operate time incl. bounce Release time Capacitance Special Product Data Dielectric Strength Coil/Contact Housing material Sealing compound Connection pins Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability 100% Duty Cycle Measured with 40% overdrive RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ! " " #$ Conditions Min Typ Max Unit according to IEC 255-5 Nylon 6/6 Epoxy resin Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz ( ( ' ) * wave soldering max. 5 sec. Unit % % & & & fully sealed Modifications in the sense of technical progress are reserved Designed at: 19.01.10 Designed by: WKOVACS Approval at: 20.01.10 Approval by: KOLBRICH Last Change at: 28.06.11 Last Change by: KSTOPPEL Approval at: 28.06.11 Approval by: CRUF Version: 03