New Product Announcement! Ultra High Dynamic Range Monolithic Amplifier 50Ω PHA-1+ 0.05 to 6 GHz Click here for data sheet The Big Deal • Ultra High IP3 • Broadband High Dynamic Range without external Matching Components • May be used as a replacement to WJ AH1a,b SOT-89 PACKAGE Pricing: $1.49 (QTY 50) ☛ LTE Performance ☛ TD-SCDMA Performance Product Overview PHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-1+, unlike competitive models, has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Key Features Feature Broad Band: 0.05 to 6.0 GHz Extremely High IP3 Versus DC power Consumption 42 dBm typical at 2 GHz Advantages Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX The PHA-1+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 20 dB above the P 1dB point. This feature makes this amplifier ideal for use in: • Driver amplifiers for complex waveform up converter paths • Drivers in linearized transmit systems • Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required Unlike competing products, Mini-Circuits PHA-1+ provides Input and Output Return Loss of 10-16 dB up to 4 GHz without the need for any external matching components Low Noise Figure:<3dB up to 4 GHz <4dB up to 6 GHz A unique feature of the PHA-1+ which separates this design from all competitors is the low noise figure performance in combination with the high dynamic range. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ AH1 part number is used for identification and comparison purposes only. Mini-Circuits ® ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Page 1 Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.