New Product Announcement! Low Noise Amplifier TAMP-1521GLN+ 50Ω 1380 to 1520 MHz The Big Deal: • Ultra Low Noise Figure, 0.75 dB typ. • High IP3, 27 dBm typ. • High Gain, 35 dB typ. • Integrated Bias Matching and Stability Circuits Click here for data sheet Pricing: $14.95 (QTY 5-49) Product Overview: The TAMP-1521GLN+ (RoHS compliant) utilizes advanced E-PHEMT technology in a 2-stage Low Noise Amplifier design built into a shielded case (size: .591”x.394”x.118”). The drop-in module offers ultra low Noise Figure and High Gain with good input and output return loss over the entire frequency range and without the need of external matching components. Key Features Feature Advantages Ultra Low NF With only 0.75 dB NF, the TAMP-1521GLN+ enables greater sensitivity for receiver applications. It includes all matching and stability circuits making this Drop-in LNA module a turn-key solution for ensuring system sensitivity in demanding applications. High IP3 At +27 dBm IP3, in combination with its low noise performance, the TAMP-1521GLN+ can improve a systems’ spur-free dynamic range which is often the critical driver in many receiver applications. Very flat, High Gain With gain of 35 dB and flatness of ± 0.7 dB, this amplifier can insulate a receiver NF from component losses or NF of the 2nd stage amplifier following the TAMP-1521GLN+ Output Power, +14 dBm Provides a good safety margin against damage or saturation from unwanted high power RF signals present at the input to a receiver. Well Matched input/ output ports With typical return loss of 18dB at the input and output ports, the TAMP-1521GLN+ can be used in cascade with many 50 Ohm components and maintain minimal interaction or reflections. Drop-in Module Eliminates the need for designers to optimize low noise transistor bias and matching circuitry. The TAMP-1521GLN+ provides the outstanding combined performance and does not require any external elements. The case PCB area is smaller than most LNA transistor designs with external circuitry Metal Case Provides a protective enclosure improving handling robustness in addition to shielding the sensitive high gain devices from close by circuitry Unconditionally stable No adverse effects due to loading of the input and output ports avoiding potential instability which can be a critical requirement when integrating high gain, high frequency devices on an open PCB assembly Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS TAMP-1521GLN+ 090923