MIL and MIV Series – 5 x 7 Ceramic SMD Oscillator ¾ 5mm x 7mm 6 Pads Ceramic Package ¾ RoHS Compliant ¾ Negative Enable Available ¾ Wide Frequency Range ¾ LVPECL or LVDS Output ELECTRICAL SPECIFICATION: LVPECL Frequency Frequency Stability Aging Operating Temperature Range Storage Temperature Range Supply Voltage (Vdd) Supply Current Output Voltage Logic “0” (Vol) Output Voltage Logic “1” (Voh) Symmetry (at 50% of wave form) Rise / Fall Time (20% to 80%) Jitter (RMS) Load Drive Capacity Enable / Disable Function LVDS 19.440 MHz to 1.000GHZ ±20ppm* to ±100ppm Inclusive of Load, Voltage, and Aging *±20ppm 0°C to +70°C only ±3ppm First Year max 0°C - +70°C to -40°C - +85°C -55°C – +125°C +2.5 VDC ±5% +3.3 VDC ±5% +2.5 VDC ±5% +3.3 VDC ±5% 65mA max 80mA max 45mA max Vdd - 1.620Vdc max 1.43V typ Vdd - 1.025Vdc min 1.10V typ 40% / 60% or 45% / 55% 1nSec max 1pSec at 12k to 20.000MHZ 50Ω 50Ω Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Vih = 70% of Vdd min to Disable Output (High Impedance) Vil = 30% min or No Connect to Enable Outputs Positive Enable / Disable Negative Enable / Disable MECHANICAL DETAIL: 7.20 [.283] MAX 2.00 [.079] MAX 2.54 [.100] 5.20 [.205] MAX 2.54 [.100] 4 5 6 3 2 1 2.54 [.100] 4.20 [.165] 2.40 [.094] 1.30 [.051] 2.00 [.079] 1.40 [.055] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED 2.54 [.100] PIN PIN PIN PIN PIN PIN 1 2 3 4 5 6 ENABLE/ DISABLE OR NC NC OR ENABLE/DISABLE CASE GROUND OUTPUT COMPLIMENTARY OUTPUT SUPPLY VOLTAGE 1.80 [.071] RECOMMENDED LAND PATTERN PART NUMBERING GUIDE: FREQUENCY MI 5x7 Ceramic SMD Output L = LVPECL V = LVDS Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC Symmetry Blank = 40%/60% A = 45%/55% Frequency Stability 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Packaging Blank = Bulk T = Tape and Reel Operating Temperature Pin 1 & 2 Connection T = Pin 1 - Enable/Disable Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 2 - No Connection N = Pin 1 - No Connection Pin 2 - Enable/Disable Enable / Disable Function Blank = Positive Enable N = Negative Enable Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision 03/01/07 H